Electrolux
Electrolux Dishwasher Pressure Switch Sensor140000554083
Suitable for Electrolux, AEG, Arthur Martin, Atag, Dieter Knoll
Stock Code: 693074
£11.10inc. VAT
£9.25 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Senses the water level by pressure so the dishwasher stops filling.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| AL5 | AEG | Means a water inlet problem, where the machine is not filling or is taking too long to fill. It is usually caused by a closed tap, a kinked hose, a blocked inlet filter, or low water pressure. | Medium |
| C1 | AEG | Means a water inlet problem, where the machine is not filling properly. It is usually caused by a closed tap, a kinked hose, a blocked inlet filter, or a siphoned drain hose. | Medium |
| E1 | AEG | Means a water intake problem, where the machine is not filling properly or fast enough. It is usually caused by a closed tap, a kinked hose, or low water pressure. | Medium |
| E10 | AEG | Means a water inlet fault, where the dishwasher is not filling, fills too slowly, or water pressure is too low. It is usually caused by a closed tap, kinked inlet hoses, or a blocked filter. | Medium |
| I10 | AEG | Means the machine is not filling or is filling too slowly. It is usually caused by a closed tap, a kinked hose, a clogged inlet filter, or a faulty water inlet valve. | Medium |
| AL5 | Electrolux | Means the machine is not filling with water or not detecting it fast enough. It is usually caused by a closed water tap, a kinked inlet hose, or a blocked filter in the inlet hose. | Medium |
| C1 | Electrolux | Means the unit is not filling correctly, filling too slowly, or the water pressure is too low. It is usually caused by a closed water tap, a kinked supply hose, or a clogged inlet filter. | Medium |
| E1 | Electrolux | Means the unit is not receiving water or not filling fast enough. It is usually caused by a closed water tap, a kinked hose, a clogged inlet filter, or low water pressure. | Medium |
| I10 | Electrolux | Means the unit is not receiving enough water or is taking too long to fill. It is usually caused by a closed water tap, a kinked supply hose, or clogged inlet filters. | Medium |
| E2 | Smeg | Means too much water has been detected inside the machine. It is usually caused by the safety pressure switch reading an overfill or the float switch being triggered, with a blocked filter as a contributing cause. | High |
| E5 | Smeg | Means the machine has not filled with water within the allotted time, usually 7 minutes. It is usually caused by a closed water tap, a kinked hose, blocked filters, or a faulty water inlet valve. | Medium |
| AL5 | Zanussi | Means the machine is not filling with water or is filling too slowly, also reported as i10 or i11. It is usually caused by a closed tap, a kinked hose, a blocked inlet filter, or an activated flood protection system. | Medium |
| C1 | Zanussi | Means the machine is not receiving enough water or cannot detect that filling has started, accompanied by a single beep or flash. It is usually caused by a closed tap, a blocked hose, or a malfunctioning inlet valve. | Medium |
| E2 | Zanussi | Means the machine is not filling with water or low water pressure has been detected, while on compact models it means the wash water has failed to reach the target temperature. It is usually caused by a water inlet problem, or on compact models a heating fault. | Medium |
| I10 | Zanussi | Means the machine is not filling with water or is filling too slowly. It is usually caused by a closed water tap, a kinked inlet hose, a clogged filter, or a faulty water inlet valve. | Medium |
AL5Medium
AEG
Means a water inlet problem, where the machine is not filling or is taking too long to fill. It is usually caused by a closed tap, a kinked hose, a blocked inlet filter, or low water pressure.
C1Medium
AEG
Means a water inlet problem, where the machine is not filling properly. It is usually caused by a closed tap, a kinked hose, a blocked inlet filter, or a siphoned drain hose.
E1Medium
AEG
Means a water intake problem, where the machine is not filling properly or fast enough. It is usually caused by a closed tap, a kinked hose, or low water pressure.
E10Medium
AEG
Means a water inlet fault, where the dishwasher is not filling, fills too slowly, or water pressure is too low. It is usually caused by a closed tap, kinked inlet hoses, or a blocked filter.
I10Medium
AEG
Means the machine is not filling or is filling too slowly. It is usually caused by a closed tap, a kinked hose, a clogged inlet filter, or a faulty water inlet valve.
AL5Medium
Electrolux
Means the machine is not filling with water or not detecting it fast enough. It is usually caused by a closed water tap, a kinked inlet hose, or a blocked filter in the inlet hose.
C1Medium
Electrolux
Means the unit is not filling correctly, filling too slowly, or the water pressure is too low. It is usually caused by a closed water tap, a kinked supply hose, or a clogged inlet filter.
E1Medium
Electrolux
Means the unit is not receiving water or not filling fast enough. It is usually caused by a closed water tap, a kinked hose, a clogged inlet filter, or low water pressure.
I10Medium
Electrolux
Means the unit is not receiving enough water or is taking too long to fill. It is usually caused by a closed water tap, a kinked supply hose, or clogged inlet filters.
E2High
Smeg
Means too much water has been detected inside the machine. It is usually caused by the safety pressure switch reading an overfill or the float switch being triggered, with a blocked filter as a contributing cause.
E5Medium
Smeg
Means the machine has not filled with water within the allotted time, usually 7 minutes. It is usually caused by a closed water tap, a kinked hose, blocked filters, or a faulty water inlet valve.
AL5Medium
Zanussi
Means the machine is not filling with water or is filling too slowly, also reported as i10 or i11. It is usually caused by a closed tap, a kinked hose, a blocked inlet filter, or an activated flood protection system.
C1Medium
Zanussi
Means the machine is not receiving enough water or cannot detect that filling has started, accompanied by a single beep or flash. It is usually caused by a closed tap, a blocked hose, or a malfunctioning inlet valve.
E2Medium
Zanussi
Means the machine is not filling with water or low water pressure has been detected, while on compact models it means the wash water has failed to reach the target temperature. It is usually caused by a water inlet problem, or on compact models a heating fault.
I10Medium
Zanussi
Means the machine is not filling with water or is filling too slowly. It is usually caused by a closed water tap, a kinked inlet hose, a clogged filter, or a faulty water inlet valve.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your dishwasher.
Safety: Switch off and unplug at the mains before you start.
You’ll needScrewdriver
- 1
- 2
- 3
- 4
- 5
- 6
- 7
06
Specifications
- Part Number
- 140000554083
- Alternative Part Numbers
- 140000554018
- EAN / Barcode
- 7321423271123
- Genuine Spare Part
- Yes
07
More Details
This is a genuine dishwasher pressure switch sensor. Waterproof and detergent resistant.
The pressure switch sensor makes sure only the right amount of water is added during the wash cycle. Keeps an eye on the water levels so it doesn’t overflow on your dishwasher. It stops the fill cycle when it reaches a certain limit.
Can also identify water level and pressure variations so you can troubleshoot your dishwasher more efficiently.
This dishwasher pressure switch sensor is from Electrolux. You can also check in with the other suitable brands from the list above.
Before ordering, please verify this part fits for your model using our compatibility checker.
08
Customer Reviews (6)
5.06 reviews
5
6
4
0
3
0
2
0
1
0
Sort by:||
Perfect replacement, easy to install
Very pleased with site info and part. Most difficult part was putting the integrated dishwasher back in to cabinet!
CD · Horsham ·
Quality
Value
Ease of Fitting
Perfect replacement
Ordered it on the Friday due to bank holiday it didn’t arrive till the Thursday. To fit it, take the front panel underneath the dishwasher off and feel underneath on the left hand side for the old part. It will come out easily if the tab is held down that locks it in place. The best thing is to refer to the new part when you’re trying to do this.
Paul Searle · Glasgow ·
Quality
Value
Ease of Fitting
High quality, works well
All good, works fine, delivery time could be quicker. could be used different type of delivery. It took more then week to get :)
Arturas · Dublin ·
Quality
Value
Ease of Fitting
As described
A perfect replacement, original part. Not easy to fit, but that's Zanussi 'design', no fault of supplier. less than £20 to save replacing the dishwasher is worth it. This is the 3rd switch from Ransomes, they just don't last very long, as many people replace dishwashers more often than the lifespan of a cheap pressure switch!
Andrew M · Sandy ·
Quality
Value
Ease of Fitting
Pressure Switch for Ikea Regora
perfect replacement, identical to the original. Easy to Fit.
Claudio Evarchi · MIlan (Italy) ·
Quality
Value
Ease of Fitting