Electrolux
Electrolux Dishwasher Lower Door Seal94599
Suitable for Electrolux, Acec, AEG, Alno, Arthur Martin
Stock Code: 1008329
£2.50inc. VAT
£2.08 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Seals around the door opening so water and heat cannot escape.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E15 | AEG | Means water has leaked into the base tray and triggered the flood protection system. It is usually caused by a temporary blockage, over foaming, or a minor leak. | Medium |
| E3 | AEG | Means the anti flood system has activated due to too much inlet water or a leak in the base tray. It is usually caused by overfilling or a leak, with the drain pump running continuously to prevent flooding. | Medium |
| E4 | AEG | Means too much water has entered the machine or a leak has occurred, activating the anti flood device. It is usually caused by blockages in the drain filter or hose, or clogged filters. | Medium |
| E15 | Electrolux | Means the anti-flood system has detected water in the base pan and the drain pump runs continuously. It is usually caused by a leak, condensation, or a faulty sensor. | Medium |
| I30 | Electrolux | Means the anti-flood system has detected water in the base pan and the drain pump runs continuously. It is usually caused by a leak, excess foam, dirty filters, or blocked spray arms. | Medium |
| AL3 | Zanussi | Means the anti-flood leak protection system has been activated after water was detected in the base tray, accompanied by three beeps or a constantly draining pump. It is usually caused by a leak triggering the safety float switch, a door not sealing, a filter blockage, or a pump failure. | High |
| AL4 | Zanussi | Means a water protection system fault, with excess water detected in the base tray and the cycle stopped to prevent a flood, also shown as four flashes or beeps. It is usually caused by a leak collecting water in the base tray or a pressure sensor issue. | Medium |
| E15 | Zanussi | Means water has leaked into the base tray, triggering the flood safety switch. It is usually caused by damaged door seals, a blocked pump, or excess foam. | Medium |
| E4 | Zanussi | Means a water leakage or overfilling issue has triggered the anti-flood system. It is usually caused by a blocked drain hose, dirty filters, a stuck flood sensor, or a pump failure. | Medium |
| F8 | Zanussi | Means a heating failure or a drainage and water level issue caused by water in the base tray triggering the anti-flood sensor, frequently reported alongside E4. It is usually caused by a leak, a filter blockage, or a pump failure. | Medium |
E15Medium
AEG
Means water has leaked into the base tray and triggered the flood protection system. It is usually caused by a temporary blockage, over foaming, or a minor leak.
E3Medium
AEG
Means the anti flood system has activated due to too much inlet water or a leak in the base tray. It is usually caused by overfilling or a leak, with the drain pump running continuously to prevent flooding.
E4Medium
AEG
Means too much water has entered the machine or a leak has occurred, activating the anti flood device. It is usually caused by blockages in the drain filter or hose, or clogged filters.
E15Medium
Electrolux
Means the anti-flood system has detected water in the base pan and the drain pump runs continuously. It is usually caused by a leak, condensation, or a faulty sensor.
I30Medium
Electrolux
Means the anti-flood system has detected water in the base pan and the drain pump runs continuously. It is usually caused by a leak, excess foam, dirty filters, or blocked spray arms.
AL3High
Zanussi
Means the anti-flood leak protection system has been activated after water was detected in the base tray, accompanied by three beeps or a constantly draining pump. It is usually caused by a leak triggering the safety float switch, a door not sealing, a filter blockage, or a pump failure.
AL4Medium
Zanussi
Means a water protection system fault, with excess water detected in the base tray and the cycle stopped to prevent a flood, also shown as four flashes or beeps. It is usually caused by a leak collecting water in the base tray or a pressure sensor issue.
E15Medium
Zanussi
Means water has leaked into the base tray, triggering the flood safety switch. It is usually caused by damaged door seals, a blocked pump, or excess foam.
E4Medium
Zanussi
Means a water leakage or overfilling issue has triggered the anti-flood system. It is usually caused by a blocked drain hose, dirty filters, a stuck flood sensor, or a pump failure.
F8Medium
Zanussi
Means a heating failure or a drainage and water level issue caused by water in the base tray triggering the anti-flood sensor, frequently reported alongside E4. It is usually caused by a leak, a filter blockage, or a pump failure.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your dishwasher.
Safety: Switch off and unplug at the mains before you start.
- 1
- 2
- 3
- 4
- 5
- 6
- 7
06
Specifications
- Part Number
- 94599
- Alternative Part Numbers
- 1520425008, 1527401002, 1527401200, 1527401309
- Genuine Spare Part
- No
07
More Details
High-quality lower dishwasher door seal. Covers the top and sides of the dishwasher door to prevent leaks. Made of rubber so it's flexible and durable to withstand frequent use and water exposure.
It forms a tight barrier when the door shuts, making sure water stays inside during the wash. Helps your dishwasher be energy-efficient while still getting the job done.
See leaks in your dishwasher’s front? It might be your door seal. This one can replace your existing door seal.
This lower door seal fits all the suitable brands from the list above.
Before ordering, please verify with our compatibility checker that this part is suitable for your model.
08
Customer Reviews (1)
5.01 review
5
1
4
0
3
0
2
0
1
0
Good product
Arrived on time, good value, easy to fit. Leaking water problem solved!
Paul Parris · Grantham ·
Quality
Value
Ease of Fitting