Electrolux
Electrolux Dishwasher Heater Kit 2000w4055373700
Suitable for Electrolux, AEG, Atag, Elektro Helios, Faure
Stock Code: 694730
£35.95inc. VAT
£29.96 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Heats the water as it circulates through the cycle.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| F8 | AEG | Means a heating fault, where the water is not reaching the required temperature in time. It is usually caused by a failure in the heating element, the NTC temperature sensor, or the control board. | High |
| E3 | Electrolux | Means the unit is taking too long to heat the water or is not heating at all. It is usually caused by a faulty heating element, a malfunctioning thermistor, or a wiring issue between the heating element and the main control board. | High |
| L1 | Electrolux | Means the rinse aid level is low, or on some models the water is not heating, or the door is not securely latched. It is usually caused by a low rinse aid level, a faulty heating element or thermostat, or an unlatched door. | Medium |
| AL7 | Zanussi | Means no water circulation has been detected. It is usually caused by a blocked filter, a blockage in the sink spigot, or a kinked or squashed drain hose. | Medium |
| E3 | Zanussi | Means the appliance has not reached the correct wash temperature, while on certain compact models it means excessive inlet water or a leak. It is usually caused by the heater, or on compact models overfilling or a drainage problem. | High |
F8High
AEG
Means a heating fault, where the water is not reaching the required temperature in time. It is usually caused by a failure in the heating element, the NTC temperature sensor, or the control board.
E3High
Electrolux
Means the unit is taking too long to heat the water or is not heating at all. It is usually caused by a faulty heating element, a malfunctioning thermistor, or a wiring issue between the heating element and the main control board.
L1Medium
Electrolux
Means the rinse aid level is low, or on some models the water is not heating, or the door is not securely latched. It is usually caused by a low rinse aid level, a faulty heating element or thermostat, or an unlatched door.
AL7Medium
Zanussi
Means no water circulation has been detected. It is usually caused by a blocked filter, a blockage in the sink spigot, or a kinked or squashed drain hose.
E3High
Zanussi
Means the appliance has not reached the correct wash temperature, while on certain compact models it means excessive inlet water or a leak. It is usually caused by the heater, or on compact models overfilling or a drainage problem.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your dishwasher.
Safety: Switch off and unplug at the mains before you start.
You’ll needScrewdriverPliers
- 1
- 2
- 3
- 4
- 5
- 6
06
Specifications
- Part Number
- 4055373700
- EAN / Barcode
- 7321423333982
- Genuine Spare Part
- Yes
07
More Details
This is a genuine dishwasher heater kit. Powered at 2000W.
Heats water to the desired temperature for effective cleaning and sanitising of dishes, ensuring optimal performance of the dishwasher.
Signs of damage include rust on the heating element, burnt wiring, and water leaks around connections. If the dishwasher fails to reach the proper temperature or produces strange noises, these may also indicate potential damage. Change it with this replacement part.
This heater kit for your dishwasher is from Electrolux. You can also check other suitable brands from the list above.
Before ordering, please verify with our compatibility checker that this part is suitable for your model.