Next Day Delivery
Order by 4pm
Genuine Parts
Quality guaranteed
UK & Ireland
Fast shipping
Expert Help
Parts advice available
Bosch
Suitable for Bosch, Airlux, Atag, Balay, Bauknecht
Stock Code: 58394
£13.54 ex. VAT
Seals the joint between fittings so water cannot leak out.
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E15 | Neff | Means water has leaked into the base tray and triggered the anti flood safety switch, leaving the pump running continuously. It is usually caused by a failed sump seal, loose hoses, or a false alarm from suds. | Medium |
| E15 | Siemens | Means water has leaked into the base pan, triggering the anti-flood sensor and causing the drain pump to run continuously. It is usually caused by excessive suds, clogged filters, or a leaking hose. | Medium |
| E4 | Whirlpool | Means a water overflow or leak in the base pan has tripped the anti-flood float switch and shut the machine down, shown as F8E4. It is usually caused by an internal leak, a door not sealing, or a blocked filter. | Medium |
Neff
Means water has leaked into the base tray and triggered the anti flood safety switch, leaving the pump running continuously. It is usually caused by a failed sump seal, loose hoses, or a false alarm from suds.
Siemens
Means water has leaked into the base pan, triggering the anti-flood sensor and causing the drain pump to run continuously. It is usually caused by excessive suds, clogged filters, or a leaking hose.
Whirlpool
Means a water overflow or leak in the base pan has tripped the anti-flood float switch and shut the machine down, shown as F8E4. It is usually caused by an internal leak, a door not sealing, or a blocked filter.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
General fitting guidance. The exact steps can vary slightly with the make and model of your dishwasher.
Safety: Switch off and unplug at the mains and turn off the water supply before you start.
These are genuine sealing gaskets for your dishwasher.
It helps prevent water leaks by creating a tight seal between connected components such as hoses, valves, or joints.
Look for signs of damage such as cracks, warping, or hardening of the sealing washers. If water leaks around the connections or the seal becomes loose during operation, it's time to replace them with this part.
These genuine sealing gaskets for your dishwasher are from Bosch. You can also check the other suitable brands from the list above.
Before ordering, please verify that this part is suitable for your model using our compatibility checker.
Although the old washers looked fine, they just didn't seal the water inlet chamber of my bosch dishwasher. New washers did the job though. Very happy. Note, push the washer to the bottom of the aperture in which they sit, then push the chamber male part through. (Dont put the washer on the male part first)
Fits to the side entry flow / drain trap, easy to fit. Very expensive for 4 o rings
When fixing our dishwasher I needed to replace these washers and Ransom Spares came up trumps. My only issue was the price and particularly p&p since the items fitted in a 1st class envelope. Have used Ransom Spares before and will do again
Our dishwasher had issues with filling and after removing the labyrinth and giving it a darn good clean with white vinegar, all seemed well. However, the O rings, having been disturbed, no longer formed a perfect seal so new ones were required. These were just what I needed and came in good time. I am very happy with the service and quality from Ransom. I will use them again.
Thanks to the team at Ransomspares for confirming these were the correct washers very quickly. Washers very easy to fit, the hardest job, especially for an integrated dishwasher is removing it to access the water distribution array. Used a silicon spray as a lubricant to ensure fit was secure as tight fit required. Sounds expensive for 4 washers, but resolved what could have been a very expensive repair or even a replacement dishwasher.