Will This Part Fit My Appliance?

Choose your brand from the list below to check your model compatibility.

Start typing your model number below to check compatibility.

Suitable For Models Of

Airlux, Atag, Balay, Bauknecht, Blaupunkt, Bosch, Constructa, Cylinda, Gaggenau, Gorenje, Ikea, Jenn Air, Junker, Kenmore, Kuppersbusch, Lord, Neff, Pelgrim, Pitsos, Profilo, Siemens, Tecnik, Thermador, Viva, Whirlpool Dishwashers


Genuine 565 mm lower dishwasher door seal. Covers the lower side of the dishwasher door to prevent leaks. Made of rubber so it's flexible and durable to withstand frequent use and water exposure.

It forms a tight barrier when the door shuts, making sure water stays inside during the wash. Helps your dishwasher be energy-efficient while still getting the job done.

See leaks in your dishwasher’s front? It might be your door seal. This dishwasher door seal can replace your existing door seal.

This lower door seal is from Bosch. You can also check with the other suitable brands from the list above.

Before ordering, please verify with our compatibility checker that this part is suitable for your model.

Manufacturers Part Number:

  • 00668079

Alternative Part Numbers:

  1. 00668079

Will this part fit your appliance?

Use our compatibility checker, Click here.

Finding your model number:

Struggling to find the model number on your Dishwasher? Click here.

Safety note:

Warning: Always unplug any appliance from the electricity supply before carrying out any work or testing on it.

Latest Product Review(s)

1 Customer Review(s)

Great product

Arrived incredibly quickly and a perfect fit and fix for our leaking dishwasher door.

By Tanja Wartnaby - Alton
15th Jul 2021




Ease of Fitting

Questions And Answers

1 Answer(s)
Can you tell me what is supplied. The photograph seems to suggest only 1 of the small metal clips that secure the seal in place but surely 2 are needed?
By Paul - Northampton - 26/07/2020
Hi Paul, I can confirm both fixing clips are included with the lower seal.
By Jordan - 26/07/2020
1 Answer(s)
What is the width of this part?
By Seth - HOLYWOOD - 16/09/2020
Hi Seth, this seal is 565mm long.
By Jordan - 16/09/2020
1 Answer(s)
This comes with two small metal T-shaped clips. They seem to be for keeping the seal on the lip of the machine but they seem very loose. How are they supposed to fit? The old ones just fell to the floor when I took the door off. Can I do without them? Thanks
By Howard - London - 08/10/2020
Hi Howard, the clips on each side of the seal are held in by the screws that go through the hinges.
By Jordan - 08/10/2020
1 Answer(s)
I have a bottom leak both sides of the door on a Bosch SBV69M10GB / 14. Could you confirm that this is the bottom seal and what the part number is for the remaining 3 sides. Also are the comparable parts or the genuine manufacturers parts?
By G - Surrey - 01/04/2021
Hi, I can confirm this is the correct bottom seal for your model. The 3 sided seal is RS56514. I can confirm these are genuine spares.
By Jordan - 01/04/2021
1 Answer(s)
This part doesn’t seem to be the bit I’m looking for . The bottom of my door closes against a plastic/rubber that is glued to the top bit of the bottom of the washer itself. There are no screws. It’s a similar colour to the dishwasher. Can’t see anything similar
By Bob - Cumbria - 28/04/2022
Hi Bob, please submit a part enquiry with the full E/NR number from the rating plate along the top edge of the dishwasher door so I can check this for you.
By Jordan - 28/04/2022

Be the first to ask a question for this product.

Ask a new question

Customers Also Viewed

Integrated Cupboard Door Mounting Kit

Integrated Cupboard Door ...

What to do if you need to replace your Dishwasher Integrated Cupboard Door Mounting ...