Bosch
Bosch Dishwasher Drain Mesh FilterFIL424
Suitable for Bosch, Balay, Constructa, Creda, De Dietrich
Stock Code: 588992
·
£13.90inc. VAT
£11.58 ex. VAT
In Stock
Next Day Delivery Available
Easy DIY repair
Most customers complete this swap with basic tools in a few minutes.
01
Compatibility Check
02
What this part does
Traps food scraps and debris before the water reaches the drain pump.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E19 | Bosch | Means a heat exchanger fault affecting the recirculation valve (also called the outlet valve), or a fault where the dishwasher cannot drain water properly. It is usually caused by a faulty recirculation valve or a drainage problem at the pump. | Medium |
| E21 | Bosch | Means a circulation pump or drainage fault that stops the dishwasher mid-cycle or prevents it draining. It is usually caused by a blockage, debris in the pump impeller, or a faulty pump motor. | Medium |
| E22 | Bosch | Means a drainage fault, often with standing water at the bottom. It is usually caused by food particles, grease, or debris clogging the internal filter, or a kinked drain hose. | High |
| E24 | Bosch | Means a drainage fault, often appearing with standing water in the tub or a humming noise. It is usually caused by a blocked filter, a clogged drain hose, or a loose pump cover. | High |
| F15 | Hotpoint | Means a sensor malfunction or a water drainage or leakage problem that often triggers a continuous drain pump cycle. It is usually caused by debris in the filter, a kinked or blocked drain hose, or water in the base activating the anti-flood switch. | High |
| F2 | Hotpoint | Means a drainage fault where the machine cannot empty water properly. It is usually caused by a blocked filter, a kinked drain hose, or a faulty drain pump. | High |
| F3 | Hotpoint | Means a drainage failure or blockage where the machine cannot empty water within the allotted time. It is usually caused by clogged filters, a blocked drain pump, or a kinked hose. | High |
| F4 | Hotpoint | Means a drainage failure or a faulty water level sensor. It is usually caused by a blocked filter, an obstructed drain pump, or a kinked drain hose. | High |
| F5 | Hotpoint | Means a drain fault where the machine cannot empty water. It is usually caused by a blocked filter, a clogged pump, or a kinked hose. | High |
| F8 | Hotpoint | Means a drainage or water level fault. It is usually caused by a blockage, a faulty drain pump, or excessive suds. | High |
| E17 | Neff | Means the water level inside the appliance is too high. It is usually caused by excessive water intake, a blockage, a drainage fault, or excessive detergent suds. | Medium |
| E22 | Neff | Means a blocked or dirty filter is preventing proper drainage, leaving residual water in the sump. It is usually caused by a blocked filter, a blocked drain pump, or a kinked drain hose. | High |
| E23 | Neff | Means there is a drainage fault with the pump jammed by food debris or glass and unable to remove water. It is usually caused by a blocked drain pump, clogged filters, or a kinked drain hose. | High |
| E24 | Neff | Means there is a drainage fault preventing the machine from emptying. It is usually caused by a blocked drain pump, clogged filters, a kinked drain hose, a loose pump cover, or a blocked hose under the sink. | High |
| E18 | Siemens | Means there is a drainage fault or a water supply issue. It is usually caused by a blocked filter, an obstructed drain pump, or a kinked drain hose. | High |
| E20 | Siemens | Means there is a drainage problem or a fault with the pump that moves water around during the wash. It is usually caused by a clogged filter, a clogged drain pump, or a blockage in the pump. | High |
| E21 | Siemens | Means the drain pump or circulation pump is jammed, obstructed, or failing. It is usually caused by food debris, broken glass, or crystallised dishwasher salt blocking the drain pump, filter, or hose. | High |
| E22 | Siemens | Means there is a drainage blockage or soiled filter system, often stopping the cycle mid-way. It is usually caused by food residue or excessive soap buildup. | High |
| E24 | Siemens | Means water is not draining from the machine. It is usually caused by a blocked drain pump, a clogged filter, or a kinked hose. | High |
| E3 | Siemens | Means the unit cannot reach the required water level in the allotted time, with a drainage issue or a water level sensor problem preventing it from filling correctly. It is usually caused by a blocked filter, a drain pump that is not operating, or a blocked spray arm. | High |
| E4 | Siemens | Means water is not draining properly or an overflow has occurred. It is usually caused by clogged filters, a blocked drain pump, or a kinked drain hose. | High |
| F9 | Whirlpool | Means the unit cannot remove water or has a continuous fill fault, displayed as F9E1 and may stop mid-cycle with error lights and a beep. It is usually caused by a blocked filter, a drainage fault, continuous filling, a faulty pump, or a faulty control board. | High |
E19Medium
Bosch
Means a heat exchanger fault affecting the recirculation valve (also called the outlet valve), or a fault where the dishwasher cannot drain water properly. It is usually caused by a faulty recirculation valve or a drainage problem at the pump.
E21Medium
Bosch
Means a circulation pump or drainage fault that stops the dishwasher mid-cycle or prevents it draining. It is usually caused by a blockage, debris in the pump impeller, or a faulty pump motor.
E22High
Bosch
Means a drainage fault, often with standing water at the bottom. It is usually caused by food particles, grease, or debris clogging the internal filter, or a kinked drain hose.
E24High
Bosch
Means a drainage fault, often appearing with standing water in the tub or a humming noise. It is usually caused by a blocked filter, a clogged drain hose, or a loose pump cover.
F15High
Hotpoint
Means a sensor malfunction or a water drainage or leakage problem that often triggers a continuous drain pump cycle. It is usually caused by debris in the filter, a kinked or blocked drain hose, or water in the base activating the anti-flood switch.
F2High
Hotpoint
Means a drainage fault where the machine cannot empty water properly. It is usually caused by a blocked filter, a kinked drain hose, or a faulty drain pump.
F3High
Hotpoint
Means a drainage failure or blockage where the machine cannot empty water within the allotted time. It is usually caused by clogged filters, a blocked drain pump, or a kinked hose.
F4High
Hotpoint
Means a drainage failure or a faulty water level sensor. It is usually caused by a blocked filter, an obstructed drain pump, or a kinked drain hose.
F5High
Hotpoint
Means a drain fault where the machine cannot empty water. It is usually caused by a blocked filter, a clogged pump, or a kinked hose.
F8High
Hotpoint
Means a drainage or water level fault. It is usually caused by a blockage, a faulty drain pump, or excessive suds.
E17Medium
Neff
Means the water level inside the appliance is too high. It is usually caused by excessive water intake, a blockage, a drainage fault, or excessive detergent suds.
E22High
Neff
Means a blocked or dirty filter is preventing proper drainage, leaving residual water in the sump. It is usually caused by a blocked filter, a blocked drain pump, or a kinked drain hose.
E23High
Neff
Means there is a drainage fault with the pump jammed by food debris or glass and unable to remove water. It is usually caused by a blocked drain pump, clogged filters, or a kinked drain hose.
E24High
Neff
Means there is a drainage fault preventing the machine from emptying. It is usually caused by a blocked drain pump, clogged filters, a kinked drain hose, a loose pump cover, or a blocked hose under the sink.
E18High
Siemens
Means there is a drainage fault or a water supply issue. It is usually caused by a blocked filter, an obstructed drain pump, or a kinked drain hose.
E20High
Siemens
Means there is a drainage problem or a fault with the pump that moves water around during the wash. It is usually caused by a clogged filter, a clogged drain pump, or a blockage in the pump.
E21High
Siemens
Means the drain pump or circulation pump is jammed, obstructed, or failing. It is usually caused by food debris, broken glass, or crystallised dishwasher salt blocking the drain pump, filter, or hose.
E22High
Siemens
Means there is a drainage blockage or soiled filter system, often stopping the cycle mid-way. It is usually caused by food residue or excessive soap buildup.
E24High
Siemens
Means water is not draining from the machine. It is usually caused by a blocked drain pump, a clogged filter, or a kinked hose.
E3High
Siemens
Means the unit cannot reach the required water level in the allotted time, with a drainage issue or a water level sensor problem preventing it from filling correctly. It is usually caused by a blocked filter, a drain pump that is not operating, or a blocked spray arm.
E4High
Siemens
Means water is not draining properly or an overflow has occurred. It is usually caused by clogged filters, a blocked drain pump, or a kinked drain hose.
F9High
Whirlpool
Means the unit cannot remove water or has a continuous fill fault, displayed as F9E1 and may stop mid-cycle with error lights and a beep. It is usually caused by a blocked filter, a drainage fault, continuous filling, a faulty pump, or a faulty control board.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
EasyGeneral fitting guidance. The exact steps can vary slightly with the make and model of your dishwasher.
- 1
- 2
- 3
- 4
- 5
- 6
06
Specifications
- Part Number
- FIL424
- EAN / Barcode
- 05030017024244
- Genuine Spare Part
- No
- Height
- 80mm
- Circumference
- 240mm
- Diameter
- 80mm
07
More Details
What is the function of a mesh filter?
A mesh filter is used to trap and remove impurities or debris from a fluid or gas flow. Mesh filters are commonly used in various applications, such as air purifiers, water filtration systems, and ventilation systems. As the fluid or gas passes through the filter, the mesh traps particles, dirt, dust, or other contaminants, allowing only clean and purified fluid or gas to continue flowing.
How does it become faulty?
The accumulated debris or particles in the filter can clog the mesh and reduce its effectiveness in filtering out impurities. If the mesh filter is subjected to excessive pressure or physical damage, such as bending, tearing, or corrosion, it can become compromised and fail to function properly.
Would this drain mesh filter fit in my dishwasher?
This drain mesh filter fits Bosch, Balay, Constructa, Creda, De Dietrich, Gaggenau, Gorenje, Hotpoint, Imperial, Kuppersbusch, Lynx, Neff, Pitsos, Profilo, Siemens, Superser, Tecnik, Thermador, and Whirlpool dishwashers. Use our compatibility checker to see if this part fits your model.
08
Customer Reviews (30)
4.930 reviews
5
28
4
2
3
0
2
0
1
0
Sort by:||
Dishwasher filter
Filter Required for used dishwasher in house recently purchased so no manual available. Website was very easy to negotiate , part was found quickly and order was received within timescale. Part fits perfectly.
Liz Robinson · Preston ·
Quality
Value
Ease of Fitting
Great value
Great value and quality. Fast delivery. Both inner and outer filter.
Gordon Hepworth · Consett ·
Quality
Value
Ease of Fitting
Perfect Replacement Filter
After about 20 years, this filter on our Siemens dishwasher was beginning to fall apart. Luckily, the one here was absolutely perfect match and fit, plus was available at a really low competitive price. What else is there to say.
Gavin Ridgway · Surbiton ·
Quality
Value
Ease of Fitting
Simple Replacement
Replaced the filter & mesh and it was a perfect fit. Easy to put in and good value and excellent service. Well packaged so as not to damage it.
sam · Portstewart ·
Quality
Value
Ease of Fitting
Spot on replacement and fits perfectly
Ordered this product as the existing item in my dishwasher had fallen to pieces. The ordering process was simple and delivery spot on. I fitted the new replacement in less than 5 minutes. Its a perfect fit!;
Rob Townley · Preston ·
Quality
Value
Ease of Fitting
09
Questions & Answers (1)
Hi there In the picture above, I only require the right hand item (the single filter with the finest mesh), not the 2 part filter on the left. Can you confirm the correct part number for this please, as you also have a 'micro mesh filter' listed with the same picture and a similar description, so I'm confused as to which part is which! Many thanks, Chris Gordon-Brown.
Chris · Uxbridge ·
Hi Chris, this filter is only available complete as per the image.
JordanStaff·