Next Day Delivery
Order by 4pm
Genuine Parts
Quality guaranteed
UK & Ireland
Fast shipping
Expert Help
Parts advice available
Bosch
Suitable for Bosch, Airlux, Atag, Balay, Bauknecht
Stock Code: 55679
£21.25 ex. VAT
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E1 | Bosch | Means a water supply problem, a door latch fault, or a heat pump motor circuit fault at the main control board. It is usually caused by a faulty water inlet valve, drain pump, or main control board. | Medium |
| E6 | Bosch | Means the control board cannot recognise the door is closed, or there is a drainage problem. It is usually caused by a faulty door latch mechanism or door sensor, or a blocked filter. | High |
| E6 | Neff | Means a door latch or switch failure is preventing the unit from detecting that the door is closed. It is usually caused by a faulty door latch or switch, or less commonly a heating circuit fault such as a faulty heating element or NTC sensor. | High |
| E6 | Siemens | Means the unit believes the door is not secured properly. It is usually caused by a faulty door latch, a faulty door sensor, or a related electronic failure. | High |
| F5E1 | Whirlpool | Means the control board cannot detect that the door is securely latched. It is usually caused by a faulty door latch switch, a broken latch assembly, or a loose wiring connection. | High |
Bosch
Means a water supply problem, a door latch fault, or a heat pump motor circuit fault at the main control board. It is usually caused by a faulty water inlet valve, drain pump, or main control board.
Bosch
Means the control board cannot recognise the door is closed, or there is a drainage problem. It is usually caused by a faulty door latch mechanism or door sensor, or a blocked filter.
Neff
Means a door latch or switch failure is preventing the unit from detecting that the door is closed. It is usually caused by a faulty door latch or switch, or less commonly a heating circuit fault such as a faulty heating element or NTC sensor.
Siemens
Means the unit believes the door is not secured properly. It is usually caused by a faulty door latch, a faulty door sensor, or a related electronic failure.
Whirlpool
Means the control board cannot detect that the door is securely latched. It is usually caused by a faulty door latch switch, a broken latch assembly, or a loose wiring connection.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
General fitting guidance. The exact steps can vary slightly with the make and model of your dishwasher.
This is a genuine dishwasher door lock catch.
It makes sure your dishwasher door stays securely shut while it’s running—no unexpected openings, no messy water spills. Just a smooth, safe wash every time.
Your dishwasher door is not closing properly? There must be a problem with the door catch. A damaged or loosened door catch doesn’t work properly. Check for signs of wear, such as rust, corrosion, or physical damage on the lock catch or its components. Change it with this part.
This Bosch dishwasher door lock catch also fits the other suitable brands from the list above.
Before ordering, please verify that this kit works for your model using our compatibility checker.
Got the part delivered wihtin a couple of days. It fitted my Bosch dishwasher no problem that i've had for 10+ years. Just seemed a bit expensive for such a small part but saved me buying a new dishwasher.