Next Day Delivery
Order by 4pm
Genuine Parts
Quality guaranteed
UK & Ireland
Fast shipping
Expert Help
Parts advice available
Bosch
Suitable for Bosch, Airlux, Atag, Balay, Bauknecht
Stock Code: 57461
£12.38 ex. VAT
Holds the door shut and tells the machine the door is closed so the cycle can run.
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E1 | Bosch | Means a water supply problem, a door latch fault, or a heat pump motor circuit fault at the main control board. It is usually caused by a faulty water inlet valve, drain pump, or main control board. | Medium |
| E6 | Bosch | Means the control board cannot recognise the door is closed, or there is a drainage problem. It is usually caused by a faulty door latch mechanism or door sensor, or a blocked filter. | High |
| E6 | Neff | Means a door latch or switch failure is preventing the unit from detecting that the door is closed. It is usually caused by a faulty door latch or switch, or less commonly a heating circuit fault such as a faulty heating element or NTC sensor. | High |
| E6 | Siemens | Means the unit believes the door is not secured properly. It is usually caused by a faulty door latch, a faulty door sensor, or a related electronic failure. | High |
| F5E1 | Whirlpool | Means the control board cannot detect that the door is securely latched. It is usually caused by a faulty door latch switch, a broken latch assembly, or a loose wiring connection. | High |
Bosch
Means a water supply problem, a door latch fault, or a heat pump motor circuit fault at the main control board. It is usually caused by a faulty water inlet valve, drain pump, or main control board.
Bosch
Means the control board cannot recognise the door is closed, or there is a drainage problem. It is usually caused by a faulty door latch mechanism or door sensor, or a blocked filter.
Neff
Means a door latch or switch failure is preventing the unit from detecting that the door is closed. It is usually caused by a faulty door latch or switch, or less commonly a heating circuit fault such as a faulty heating element or NTC sensor.
Siemens
Means the unit believes the door is not secured properly. It is usually caused by a faulty door latch, a faulty door sensor, or a related electronic failure.
Whirlpool
Means the control board cannot detect that the door is securely latched. It is usually caused by a faulty door latch switch, a broken latch assembly, or a loose wiring connection.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
General fitting guidance. The exact steps can vary slightly with the make and model of your dishwasher.
Safety: Switch off and unplug at the mains before you start.
The interlock mechanism detects the position of the door through a switch or sensor. When the door is closed and latched, the switch or sensor signals to the dishwasher's control system that it is safe to proceed with the selected cycle. If the door is not fully closed or latched, the switch or sensor will prevent the dishwasher from starting or continuing its operation.
The interlock may be damaged or worn out if you notice that the door of your washing machine won't latch shut or lock firmly. If the machine won't start or abruptly stops mid-cycle, the door interlock might be the reason.
This door interlock is a genuine Bosch dishwasher replacement part. It also fits Balay, Blaupunkt, Constructa, Gaggenau, Gorenje, Ikea, Junker, Koenic, Kuppersbusch, Neff, Pitsos, Profilo, Siemens, Tecnik, Thermador, Viva, and Whirlpool dishwashers.
To verify compatibility, check the model number and specifications provided on the product page.
If you need to replace the door latch interlock on your dishwasher, we've got the video for you.
The following DIY repair video should assist you in fitting this part. However, the exact procedure may differ depending on your make and model.
Can't fault it. Genuine and original part. Good price
Easy to fit and worked as advertised and expected. Delivery sleet than advertised
Dishwasher catch was starting to play up making it difficult to open and close at times. Ordered a replacement and arrived quickly. Simple swap as only held in with one screw. It took longer pulling the dishwasher out from under the surface than fitting the new item. Once installed I have a very satisfying 'click' once again when closing and opening the door. Thanks
Dishwasher door wouldn't stay closed so ordered a new catch. It arrived very quickly and is a good quality item. Took about 5 minutes to change it and now all working properly.
Excellent. The only reason for for a drop in star rating is the design of the manufactures machine fixing which is ridiculously weak and not designed for refixing therefore required some modification to fix in place
Will this fit Bosch SMS2ITI41G/01?
Hi Rob, I can confirm this is correct for your dishwasher.
Hello Is this compatible with Bosch dishwasher SMV40C30GB/55? Thanks
Hi David, thanks for your message. I can confirm this is correct for your dishwasher.
Hi the door latch on our old Bosch dishwasher has broken and I am looking for a replacement. As far as I can see the number is SMI2011 GB/13. 0730-303-618 there are a few other numbers as well FD7401 001289 Typ 5r 288 I know our machine is pretty old already. Many thanks Ronnie McCracken
Hi Ronnie, the door catch required for your model is RS56456.