Beko
Beko Dishwasher Flow Through Heater ElementC00912509
Suitable for Beko, Altus, Arcelik, Belling, Blomberg
Stock Code: 158452
·
£23.80inc. VAT
£19.83 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Heats the water as it circulates through the cycle.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E3 | Blomberg | Means the water is not heating up or not reaching the required temperature within the set time. It is usually caused by a faulty heating element, a faulty temperature sensor (thermistor), or a broken wiring connection. | High |
E3High
Blomberg
Means the water is not heating up or not reaching the required temperature within the set time. It is usually caused by a faulty heating element, a faulty temperature sensor (thermistor), or a broken wiring connection.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your dishwasher.
Safety: Switch off at the mains and turn off the water supply before you start, and let it cool first.
You’ll needScrewdriverPliersTowel
- 1
- 2
- 3
- 4
- 5
- 6
- 7
06
Specifications
- Part Number
- C00912509
- Alternative Part Numbers
- 1888130100, 1888130200, 1888150100
- Genuine Spare Part
- Yes
07
More Details
What is a flow-through heater?
A flow-through heater is a heating element designed to heat water as it passes through the dishwasher. It has a metal coil heated by an electrical current.
Cold water enters the dishwasher through a water inlet valve and is pumped over the heating element. The heated water is then used for various purposes, such as washing dishes in a dishwasher.
The flow-through heater is controlled by a thermostat that monitors and maintains the desired water temperature.
When do you replace it?
A flow-through heater in a dishwasher may need replacement if you experience inadequate heating, notice a burning smell during operation, observe visible damage such as corrosion or cracks in the heating element, or if the dishwasher consistently trips the circuit breaker due to the heating element drawing excessive electrical current.
Would this fit in my dishwasher?
This flow-through heater is a genuine Beko dishwasher spare part. It also fits Altus, Arcelik, Belling, Blomberg, Bru, Elektra Bregenz, Flavel, Grundig, Howden, Lamona, Leisure, Maytag, Proline, and Technika dishwashers.
Use our compatibility checker to see if this part fits your model.
08
Customer Reviews (16)
4.916 reviews
5
15
4
1
3
0
2
0
1
0
Sort by:||
Replaced within 90mins
Dishwasher stopped heating up during wash cycles and was turned off for a few months. I did some research and concluded it could be the Heat Exchanger. Due to the cost of the part, I figured it was worth a try. Basically -dishwasher now works and the washing cycles are even better than before due to the new part replacement. I highly recommend it. I'm planning on purchasing other parts from this website. Delivery was good and easy.
James Watson · Orpington ·
Quality
Value
Ease of Fitting
Good product
Fast delivery and great product. I highly recommended
Slawek Bojdol · Staveley ·
Quality
Value
Ease of Fitting
Good price and service
Good price and service. Received promptly, reasonably well packaged.
Rob Andrews · Northampton ·
Quality
Value
Ease of Fitting
Perfect replacement
Thought I was going to have buy a new Dishwasher but then saw this at under £20 so thought I'd have a go at fixing the old one. Perfect replacement part, pretty easy to fit and restored heat to the dishwasher. Stopped me washing up for a bit longer.
Steve · Gillingham ·
Quality
Value
Ease of Fitting
Great product!
Great product, identical to the one I replaced. Very easy to fit and is working perfectly. Very highly recommended.
Aamir Khan · High Wycombe ·
Quality
Value
Ease of Fitting
09
Questions & Answers (2)
im not too sure if this is the part i require. my dishwasher water isnt heating and the drying cycle is not drying. please can you advise me.
Caroline · Emsworth ·
Hi Caroline, unfortunately we're unable to diagnose faults. I'd recommend contacting an engineer to see if they can confirm the parts you require.
JordanStaff·
The water in my dishwasher isn't heating up I've replaced the thermostat and still isn't heating up will this heating element be the key? Bear in mind it's olny 2 years old thanks
Mason · Kettering ·
Hi Mason, it sounds like it could be a faulty element, but I can't guarantee it as we're unable to diagnose the faults.
JordanStaff·