Beko
Beko Dishwasher Display Card Control PanelC00864769
Suitable for Beko, Blomberg, Grundig
Stock Code: 829460
£48.95inc. VAT
£40.79 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Runs the wash program and switches the pump, heater and valves.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| C6 | Grundig | Means the water cannot reach the required temperature, so the cycle stops. It is usually caused by a faulty heating element, a defective thermostat or sensor, or a control board failure. | Medium |
| E2 | Grundig | Means the cycle stops or is interrupted suddenly. It is usually caused by a faulty heating element, a main control board fault, or a leak that can leave a limescale trace to the source. | Medium |
C6Medium
Grundig
Means the water cannot reach the required temperature, so the cycle stops. It is usually caused by a faulty heating element, a defective thermostat or sensor, or a control board failure.
E2Medium
Grundig
Means the cycle stops or is interrupted suddenly. It is usually caused by a faulty heating element, a main control board fault, or a leak that can leave a limescale trace to the source.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your dishwasher.
Safety: Switch off and unplug at the mains before you start.
You’ll needScrewdriver
- 1
- 2
- 3
- 4
- 5
- 6
- 7
06
Specifications
- Part Number
- C00864769
- Alternative Part Numbers
- 1739440010
- Genuine Spare Part
- Yes
07
More Details
This is a genuine display card control panel for your dishwasher.
Helps you select and monitor wash cycles, settings, and the time remaining. It also provides essential information about the dishwasher's operation, including cycle status and error messages.
Signs of damage to the dishwasher display card control panel include cracks, unresponsive buttons, a flickering display, physical distortion, corrosion around connections, and loose connections. Change it promptly with this replacement part.
This display card control panel is from Beko. Also works on other dishwasher brands like Blomberg and Grundig.
Before ordering, please verify that this kit works for your model using our compatibility checker.
08
Customer Reviews (1)
5.01 review
5
1
4
0
3
0
2
0
1
0
it works!
Fitted the replacement control panel - fairly straightforward and everything came back to life . Previously the display had disappeared and I was getting intermittent tripping of the power. Brilliant
Bob · Stowmarket ·
Quality
Value
Ease of Fitting