AEG
AEG Dishwasher Water Drain Hose 2.25m140003571019
Suitable for AEG, Arthur Martin, Atag, Bluesky, Boretti
Stock Code: 230893
·
£14.20inc. VAT
£11.83 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Carries the waste water from the pump out to the household drain.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| AL6 | AEG | Means a water drainage problem, where the machine cannot empty properly. It is usually caused by clogged filters or sump, a kinked drain hose, a blocked sink spigot, or a siphon blanking plug left in place. | High |
| C2 | AEG | Means a water drainage failure, where the machine cannot empty properly. It is usually caused by a kinked drain hose, a clogged internal filter, a dirty sump, or a blocked sink spigot. | High |
| E2 | AEG | Means a drainage failure where water is not emptying properly, or on some compact models a heating element malfunction. It is usually caused by clogged filters, a kinked drain hose, a blocked drain pump, or an improperly installed sink spigot. | High |
| I20 | AEG | Means a drainage fault, where the machine cannot expel water properly. It is usually caused by a clogged filter, a blocked drain hose, or a faulty drain pump. | High |
| AL6 | Electrolux | Means the unit cannot drain the water away. It is usually caused by clogged filters, a blocked drain hose, a restricted sink trap, or a blocked drain pump. | High |
| C2 | Electrolux | Means the unit is not draining properly. It is usually caused by clogged filters, a blocked drain pump, a kinked drain hose, or a blocked sink spigot. | High |
| E2 | Electrolux | Means the machine cannot remove the water, leaving it sitting in the tub. It is usually caused by a clogged filter, an obstructed drain pump, or a kinked drain hose. | High |
| E20 | Electrolux | Means the unit cannot remove the water. It is usually caused by a blocked cylindrical filter at the base, a clogged drain hose, or a faulty drain pump. | High |
| E4 | Electrolux | Means standing water is preventing the unit from draining correctly. It is usually caused by a drainage fault, a water leak into the base pan, or an overfill from excess foam due to the wrong detergent. | High |
| F8 | Electrolux | Means the unit cannot empty the water properly, with water remaining in the bottom of the tub. It is usually caused by a blocked filter, a clogged drain hose, or a malfunctioning sensor. | High |
| I20 | Electrolux | Means the dishwasher is not draining properly. It is usually caused by a blocked drain pump, a clogged waste hose, an unremoved knockout plug in the disposer, or a clogged sink spigot. | High |
| I44 | Electrolux | Means the pressure switch has detected a water level or drainage problem. It is usually caused by dirty filters, a clogged drain pump, or a kinked drain hose. | High |
| AL2 | Zanussi | Means the machine is unable to remove water from the tub, also reported as i20, C2, F2, or two beeps or flashes. It is usually caused by a blockage, a clogged filter, or an incorrect drain installation. | High |
| AL3 | Zanussi | Means the anti-flood leak protection system has been activated after water was detected in the base tray, accompanied by three beeps or a constantly draining pump. It is usually caused by a leak triggering the safety float switch, a door not sealing, a filter blockage, or a pump failure. | High |
| AL6 | Zanussi | Means the machine is unable to empty water, also reported as i20, C2, or F2. It is usually caused by clogged filters, a blocked drain pump, a kinked drain hose, or a blocked sink spigot. | High |
| C2 | Zanussi | Means the machine cannot empty water, interchangeable with i20, F2, or AL6. It is usually caused by a blocked filter, a clogged drain hose, or a faulty drain pump. | High |
| I20 | Zanussi | Means the appliance is unable to remove water. It is usually caused by a clogged filter, a blocked or kinked drain hose, or a faulty drain pump. | High |
AL6High
AEG
Means a water drainage problem, where the machine cannot empty properly. It is usually caused by clogged filters or sump, a kinked drain hose, a blocked sink spigot, or a siphon blanking plug left in place.
C2High
AEG
Means a water drainage failure, where the machine cannot empty properly. It is usually caused by a kinked drain hose, a clogged internal filter, a dirty sump, or a blocked sink spigot.
E2High
AEG
Means a drainage failure where water is not emptying properly, or on some compact models a heating element malfunction. It is usually caused by clogged filters, a kinked drain hose, a blocked drain pump, or an improperly installed sink spigot.
I20High
AEG
Means a drainage fault, where the machine cannot expel water properly. It is usually caused by a clogged filter, a blocked drain hose, or a faulty drain pump.
AL6High
Electrolux
Means the unit cannot drain the water away. It is usually caused by clogged filters, a blocked drain hose, a restricted sink trap, or a blocked drain pump.
C2High
Electrolux
Means the unit is not draining properly. It is usually caused by clogged filters, a blocked drain pump, a kinked drain hose, or a blocked sink spigot.
E2High
Electrolux
Means the machine cannot remove the water, leaving it sitting in the tub. It is usually caused by a clogged filter, an obstructed drain pump, or a kinked drain hose.
E20High
Electrolux
Means the unit cannot remove the water. It is usually caused by a blocked cylindrical filter at the base, a clogged drain hose, or a faulty drain pump.
E4High
Electrolux
Means standing water is preventing the unit from draining correctly. It is usually caused by a drainage fault, a water leak into the base pan, or an overfill from excess foam due to the wrong detergent.
F8High
Electrolux
Means the unit cannot empty the water properly, with water remaining in the bottom of the tub. It is usually caused by a blocked filter, a clogged drain hose, or a malfunctioning sensor.
I20High
Electrolux
Means the dishwasher is not draining properly. It is usually caused by a blocked drain pump, a clogged waste hose, an unremoved knockout plug in the disposer, or a clogged sink spigot.
I44High
Electrolux
Means the pressure switch has detected a water level or drainage problem. It is usually caused by dirty filters, a clogged drain pump, or a kinked drain hose.
AL2High
Zanussi
Means the machine is unable to remove water from the tub, also reported as i20, C2, F2, or two beeps or flashes. It is usually caused by a blockage, a clogged filter, or an incorrect drain installation.
AL3High
Zanussi
Means the anti-flood leak protection system has been activated after water was detected in the base tray, accompanied by three beeps or a constantly draining pump. It is usually caused by a leak triggering the safety float switch, a door not sealing, a filter blockage, or a pump failure.
AL6High
Zanussi
Means the machine is unable to empty water, also reported as i20, C2, or F2. It is usually caused by clogged filters, a blocked drain pump, a kinked drain hose, or a blocked sink spigot.
C2High
Zanussi
Means the machine cannot empty water, interchangeable with i20, F2, or AL6. It is usually caused by a blocked filter, a clogged drain hose, or a faulty drain pump.
I20High
Zanussi
Means the appliance is unable to remove water. It is usually caused by a clogged filter, a blocked or kinked drain hose, or a faulty drain pump.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your dishwasher.
Safety: Switch off and unplug at the mains before you start.
You’ll needScrewdriverPliers
- 1
- 2
- 3
- 4
- 5
- 6
06
Specifications
- Part Number
- 140003571019
- Alternative Part Numbers
- 1118549003, 1118549011, 1118664000, 1118664109
- EAN / Barcode
- 7321421687094
- Genuine Spare Part
- Yes
07
More Details
This is a genuine dishwasher drain hose that’s 2.25 metres in size. Made of flexible plastic to fit with the dishwasher and plumbing layout.
It’s fitted with hose fitting and clamps on both ends so it fits snugly to the plumbing system.
After every wash cycle, the drain hose extracts wastewater from the dishwasher. That water then flows into the home's or kitchen's drainage system.
This dishwasher drain hose is from AEG. You can also check in with the other suitable brands from the list above.
Before ordering, please verify with our compatibility checker that this part is suitable for your model.
08
Customer Reviews (8)
5.08 reviews
5
8
4
0
3
0
2
0
1
0
Sort by:||
Dishwasher
The part was just what I needed/ordered. The accuracy of the exploded view drawings is perfect. The delivery timescale was exceptional 👌
Simon Wilde · St Helens ·
Quality
Value
Ease of Fitting
Quick and easy order
Found the part very quickly using the model number. Super quick delivery
Melissa Dyer · Cheshunt ·
Quality
Value
Ease of Fitting
Good value for money
The item was easy to order and delivered quickly. Original spare and was good value for money.
Rohan Paul · Bristol ·
Quality
Value
Ease of Fitting
Great replacement part - drain hose
Website was fantastic in ensuring the part I ordered was the right part I needed. Arrived in good time and whilst fitting was not easy (first time I’d tackled taking apart a dishwasher to get to the old hose) but the part was a perfect like for like replacement and appears to be good quality.
Tim Dwyer · Loughborough ·
Quality
Value
Ease of Fitting
Does the Job
Does the job, fitted nicely on the Electrolux dishwasher nicely.
James Webb · Leicester ·
Quality
Value
Ease of Fitting
09
Questions & Answers (2)
will this fit Electrolux Model ESL6115 pcn911939201/02 Thank you
ROBERT · Newcastle upon Tyne ·
Hi Robert, I can confirm this is the correct drain hose for your dishwasher.
JordanStaff·
Hi have aeg dishwasher f35020v1. 91153904302. Need outlet pipe with elbow to pump outside diam of pump connector to your flexible outlet 30mm+/-. Elbow needs 30 mm internal diam. Thank you. Peter pooley
Peter · Faversham. Kent ·
Hi Peter, I can confirm this is the correct drain hose listed for your model.
JordanStaff·