AEG
AEG Dishwasher Heating Element 2000w1560734012
Suitable for AEG, Arthur Martin, Atag, Bluesky, Boretti
Stock Code: 233108
·
£38.90inc. VAT
£32.42 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Heats the water as it circulates through the cycle.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| F8 | AEG | Means a heating fault, where the water is not reaching the required temperature in time. It is usually caused by a failure in the heating element, the NTC temperature sensor, or the control board. | High |
| E3 | Electrolux | Means the unit is taking too long to heat the water or is not heating at all. It is usually caused by a faulty heating element, a malfunctioning thermistor, or a wiring issue between the heating element and the main control board. | High |
| L1 | Electrolux | Means the rinse aid level is low, or on some models the water is not heating, or the door is not securely latched. It is usually caused by a low rinse aid level, a faulty heating element or thermostat, or an unlatched door. | Medium |
| E3 | Zanussi | Means the appliance has not reached the correct wash temperature, while on certain compact models it means excessive inlet water or a leak. It is usually caused by the heater, or on compact models overfilling or a drainage problem. | High |
F8High
AEG
Means a heating fault, where the water is not reaching the required temperature in time. It is usually caused by a failure in the heating element, the NTC temperature sensor, or the control board.
E3High
Electrolux
Means the unit is taking too long to heat the water or is not heating at all. It is usually caused by a faulty heating element, a malfunctioning thermistor, or a wiring issue between the heating element and the main control board.
L1Medium
Electrolux
Means the rinse aid level is low, or on some models the water is not heating, or the door is not securely latched. It is usually caused by a low rinse aid level, a faulty heating element or thermostat, or an unlatched door.
E3High
Zanussi
Means the appliance has not reached the correct wash temperature, while on certain compact models it means excessive inlet water or a leak. It is usually caused by the heater, or on compact models overfilling or a drainage problem.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your dishwasher.
Safety: Switch off at the mains and turn off the water supply before you start, and let it cool first.
You’ll needScrewdriverPliersTowel
- 1
- 2
- 3
- 4
- 5
- 6
- 7
06
Specifications
- Part Number
- 1560734012
- Alternative Part Numbers
- 1111455109, 1560734004, 50297618006
- EAN / Barcode
- 7321421252810
- Genuine Spare Part
- Yes
07
More Details
This is a genuine dishwasher heating element replacement in 2000W.
Boosts the water temperature in your dishwasher up to about 140°F. This keeps your dishes thoroughly cleaned and properly sanitised.
If your dishes are cold or damp after a cycle, the heating element might not be working properly. It could be struggling to reach the temperature needed for drying or sanitizing. Change it with this replacement part.
This heating element for your dishwasher is from AEG. You can also check other suitable brands from the list above.
Before ordering, please verify with our compatibility checker that this part is suitable for your model.
08
Customer Reviews (2)
5.02 reviews
5
2
4
0
3
0
2
0
1
0
Fitted easy
Value for money, top quality part.would use this service again .
Adrain pulfrey · Grantham ·
Quality
Value
Ease of Fitting
No issue with product
Product promptly arrived. Compared to similar products I would rate it as great value for my money
Roger Miles · Milton Keynes ·
Quality
Value
Ease of Fitting
09
Questions & Answers (2)
Hi Do you have the heating element for product 911535036 type 911D53-1T? Thanks
p · london ·
Hi, I can confirm this is the correct heating element for your model.
JordanStaff·
Will this heating element fit a RENGORA prod No 911 535 073 type GHE623DA1.
Clive · Hebden Bridge ·
Hi Clive, the heater element for your model is RS693252.
JordanStaff·