AEG
AEG Dishwasher Heating Element 2000w233108
Suitable for AEG, Arthur Martin, Atag, Bluesky, Carma
Stock Code: 1008328
£26.00inc. VAT
£21.67 ex. VAT
Usually Despatched Within 6 Weeks
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Heats the water as it circulates through the cycle.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| F8 | AEG | Means a heating fault, where the water is not reaching the required temperature in time. It is usually caused by a failure in the heating element, the NTC temperature sensor, or the control board. | High |
| E3 | Electrolux | Means the unit is taking too long to heat the water or is not heating at all. It is usually caused by a faulty heating element, a malfunctioning thermistor, or a wiring issue between the heating element and the main control board. | High |
| L1 | Electrolux | Means the rinse aid level is low, or on some models the water is not heating, or the door is not securely latched. It is usually caused by a low rinse aid level, a faulty heating element or thermostat, or an unlatched door. | Medium |
| E3 | Zanussi | Means the appliance has not reached the correct wash temperature, while on certain compact models it means excessive inlet water or a leak. It is usually caused by the heater, or on compact models overfilling or a drainage problem. | High |
F8High
AEG
Means a heating fault, where the water is not reaching the required temperature in time. It is usually caused by a failure in the heating element, the NTC temperature sensor, or the control board.
E3High
Electrolux
Means the unit is taking too long to heat the water or is not heating at all. It is usually caused by a faulty heating element, a malfunctioning thermistor, or a wiring issue between the heating element and the main control board.
L1Medium
Electrolux
Means the rinse aid level is low, or on some models the water is not heating, or the door is not securely latched. It is usually caused by a low rinse aid level, a faulty heating element or thermostat, or an unlatched door.
E3High
Zanussi
Means the appliance has not reached the correct wash temperature, while on certain compact models it means excessive inlet water or a leak. It is usually caused by the heater, or on compact models overfilling or a drainage problem.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your dishwasher.
Safety: Switch off at the mains and turn off the water supply before you start, and let it cool first.
You’ll needScrewdriverPliersTowel
- 1
- 2
- 3
- 4
- 5
- 6
- 7
06
Specifications
- Part Number
- 233108
- Alternative Part Numbers
- 1111455109, 1560734004, 1560734012, 50297618006
- Genuine Spare Part
- No
- 1560734012
07
More Details
This dishwasher heating element is a high quality manufacturer's replacement part and it is responsible for heating the water used in your dishwasher. Hot water helps dissolve detergent, remove food debris, and sanitise your dishes. Has a power rating of 2000 watts.
Also heats the air inside the dishwasher so there’s no moisture left in the dishes, glassware, and utensils. They’re ready for storage once they’re out of the dishwasher.
The heating element is from AEG. You can also check in with the other suitable brands from the list above.
Before ordering, please verify that this part is suitable for your model using our compatibility checker.
08
Customer Reviews (4)
5.04 reviews
5
4
4
0
3
0
2
0
1
0
Perfect fit
Replacement element for dishwasher, size identical to original so no problems fitting.
Graham Ross · Dornoch ·
Quality
Value
Ease of Fitting
Economical Replacement
Spot on, can't tell any difference between this and the OEM part. Fitted perfectly and working absolutely fine. Many thanks again Ransom Spares.
Andrew Powell · Alnwick ·
Quality
Value
Ease of Fitting
Heating Element
Part is fine but not happy when ordering you are not told if part is in stock. This one wasn't and customer had to wait quite a while for a repair. There should be something on the site telling you if parts are in stock.
John Villeneuve · Poole ·
Quality
Value
Ease of Fitting
Heating element.
Good product, prompt delivery, easy to fit. Thank you.
John Villeneuve · Poole ·
Quality
Value
Ease of Fitting