AEG
AEG Dishwasher Drain Hose140011410051
Suitable for AEG, Atag, Electrolux, Husqvarna Electrolux, Juno
Stock Code: 694382
£11.70inc. VAT
£9.75 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Carries the waste water from the pump out to the household drain.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| AL6 | AEG | Means a water drainage problem, where the machine cannot empty properly. It is usually caused by clogged filters or sump, a kinked drain hose, a blocked sink spigot, or a siphon blanking plug left in place. | High |
| C2 | AEG | Means a water drainage failure, where the machine cannot empty properly. It is usually caused by a kinked drain hose, a clogged internal filter, a dirty sump, or a blocked sink spigot. | High |
| E2 | AEG | Means a drainage failure where water is not emptying properly, or on some compact models a heating element malfunction. It is usually caused by clogged filters, a kinked drain hose, a blocked drain pump, or an improperly installed sink spigot. | High |
| I20 | AEG | Means a drainage fault, where the machine cannot expel water properly. It is usually caused by a clogged filter, a blocked drain hose, or a faulty drain pump. | High |
| AL6 | Electrolux | Means the unit cannot drain the water away. It is usually caused by clogged filters, a blocked drain hose, a restricted sink trap, or a blocked drain pump. | High |
| C2 | Electrolux | Means the unit is not draining properly. It is usually caused by clogged filters, a blocked drain pump, a kinked drain hose, or a blocked sink spigot. | High |
| E2 | Electrolux | Means the machine cannot remove the water, leaving it sitting in the tub. It is usually caused by a clogged filter, an obstructed drain pump, or a kinked drain hose. | High |
| E20 | Electrolux | Means the unit cannot remove the water. It is usually caused by a blocked cylindrical filter at the base, a clogged drain hose, or a faulty drain pump. | High |
| E4 | Electrolux | Means standing water is preventing the unit from draining correctly. It is usually caused by a drainage fault, a water leak into the base pan, or an overfill from excess foam due to the wrong detergent. | High |
| F8 | Electrolux | Means the unit cannot empty the water properly, with water remaining in the bottom of the tub. It is usually caused by a blocked filter, a clogged drain hose, or a malfunctioning sensor. | High |
| I20 | Electrolux | Means the dishwasher is not draining properly. It is usually caused by a blocked drain pump, a clogged waste hose, an unremoved knockout plug in the disposer, or a clogged sink spigot. | High |
| I44 | Electrolux | Means the pressure switch has detected a water level or drainage problem. It is usually caused by dirty filters, a clogged drain pump, or a kinked drain hose. | High |
| E6 | Smeg | Means the machine cannot empty its water within the allotted time, typically 3 minutes. It is usually caused by a blocked drain pump, clogged filters, or a kinked drain hose. | High |
| E9 | Smeg | Means the water level has exceeded safety limits, triggering overfill or flood protection. It is usually caused by a blocked filter, a faulty drain pump, a leaky inlet valve, or excessive suds. | High |
AL6High
AEG
Means a water drainage problem, where the machine cannot empty properly. It is usually caused by clogged filters or sump, a kinked drain hose, a blocked sink spigot, or a siphon blanking plug left in place.
C2High
AEG
Means a water drainage failure, where the machine cannot empty properly. It is usually caused by a kinked drain hose, a clogged internal filter, a dirty sump, or a blocked sink spigot.
E2High
AEG
Means a drainage failure where water is not emptying properly, or on some compact models a heating element malfunction. It is usually caused by clogged filters, a kinked drain hose, a blocked drain pump, or an improperly installed sink spigot.
I20High
AEG
Means a drainage fault, where the machine cannot expel water properly. It is usually caused by a clogged filter, a blocked drain hose, or a faulty drain pump.
AL6High
Electrolux
Means the unit cannot drain the water away. It is usually caused by clogged filters, a blocked drain hose, a restricted sink trap, or a blocked drain pump.
C2High
Electrolux
Means the unit is not draining properly. It is usually caused by clogged filters, a blocked drain pump, a kinked drain hose, or a blocked sink spigot.
E2High
Electrolux
Means the machine cannot remove the water, leaving it sitting in the tub. It is usually caused by a clogged filter, an obstructed drain pump, or a kinked drain hose.
E20High
Electrolux
Means the unit cannot remove the water. It is usually caused by a blocked cylindrical filter at the base, a clogged drain hose, or a faulty drain pump.
E4High
Electrolux
Means standing water is preventing the unit from draining correctly. It is usually caused by a drainage fault, a water leak into the base pan, or an overfill from excess foam due to the wrong detergent.
F8High
Electrolux
Means the unit cannot empty the water properly, with water remaining in the bottom of the tub. It is usually caused by a blocked filter, a clogged drain hose, or a malfunctioning sensor.
I20High
Electrolux
Means the dishwasher is not draining properly. It is usually caused by a blocked drain pump, a clogged waste hose, an unremoved knockout plug in the disposer, or a clogged sink spigot.
I44High
Electrolux
Means the pressure switch has detected a water level or drainage problem. It is usually caused by dirty filters, a clogged drain pump, or a kinked drain hose.
E6High
Smeg
Means the machine cannot empty its water within the allotted time, typically 3 minutes. It is usually caused by a blocked drain pump, clogged filters, or a kinked drain hose.
E9High
Smeg
Means the water level has exceeded safety limits, triggering overfill or flood protection. It is usually caused by a blocked filter, a faulty drain pump, a leaky inlet valve, or excessive suds.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your dishwasher.
Safety: Switch off and unplug at the mains before you start.
You’ll needScrewdriverPliers
- 1
- 2
- 3
- 4
- 5
- 6
06
Specifications
- Part Number
- 140011410051
- Genuine Spare Part
- Yes
07
More Details
This genuine dishwasher drain hose measures 227 cm and comes with handy fittings and clamps at each end—so it’s easy to connect to your dishwasher and your home’s plumbing setup.
Once your dishes are sparkling clean, this hose takes care of the dirty water—sending it safely down the drain.
But if you spot any cracks, leaks, or wear and tear, it might be time for a fresh one. Swap it out with this replacement part.
This dishwasher drain hose is from AEG. It also fits Atag, Electrolux, Husqvarna Electrolux, Juno, Progress, Smeg, and Zanker models.
Before ordering, please verify with our compatibility checker that this part is suitable for your model.
08
Customer Reviews (1)
5.01 review
5
1
4
0
3
0
2
0
1
0
Drain hose
Good product Easy to fit and does thr job well Will buy again if required
David Lee · Fulwood ·
Quality
Value
Ease of Fitting