Next Day Delivery
Order by 4pm
Genuine Parts
Quality guaranteed
UK & Ireland
Fast shipping
Expert Help
Parts advice available
Whirlpool
Suitable for Whirlpool, Algor, Arcelik as, Bauknecht, Beko
Stock Code: 138091
£20.63 ex. VAT
Generates the heat that the fan circulates around the oven.
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E5 | Beko | Means a sensor malfunction, often an open circuit or a faulty NTC temperature sensor, so the oven cannot heat correctly. It is usually caused by a failed NTC temperature sensor or an open circuit. | Medium |
| E1 | Whirlpool | Means the oven cannot control its temperature because of an electronic control board, keypad, or temperature sensor fault. It is usually caused by a faulty electronic control board, a shorted keypad, or a failed temperature sensor. | Medium |
| E6 | Whirlpool | Means the oven cannot detect its internal temperature, appearing as F6 E6 on wall ovens. It is usually caused by a faulty temperature sensor, damaged wiring, or a faulty control board. | Medium |
Beko
Means a sensor malfunction, often an open circuit or a faulty NTC temperature sensor, so the oven cannot heat correctly. It is usually caused by a failed NTC temperature sensor or an open circuit.
Whirlpool
Means the oven cannot control its temperature because of an electronic control board, keypad, or temperature sensor fault. It is usually caused by a faulty electronic control board, a shorted keypad, or a failed temperature sensor.
Whirlpool
Means the oven cannot detect its internal temperature, appearing as F6 E6 on wall ovens. It is usually caused by a faulty temperature sensor, damaged wiring, or a faulty control board.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
General fitting guidance. The exact steps can vary slightly with the make and model of your cooker.
Safety: Switch off and unplug at the mains and let it cool before you start.
This is a genuine round fan heating element for your oven powered at 2000 W, with 2 turns and dimensions of 215 mm high by 190 mm wide, a 70 mm bracket, and 25 mm tags.
With two mounting points that come with screws, and other fasteners.
The forced convection feature of the round fan heating element distributes the heated, toasty air throughout the oven after drawing in new air.
If your oven isn't heating up properly, takes longer to reach the desired temperature, or has patches that are hotter or colder than they should be, that's your cue to replace the fan element.
Check out our video below on how to fit a new one.
This round fan heating element is from Belling. You can also check the other suitable brands from the list above.
Before ordering, please verify that this part is suitable for your model using our compatibility checker.
Please note that the following video will give you a guide on how to fit this part, however the exact fitting may differ depending on your make and model.
Safety Warning - Always unplug from the mains before carrying out any repairs.
Replaced my fan oven element and all is working great. Thankyou RansomSpares!
I have purchased this item before from Randoms 4years ago and needed a replacement again. Really easy to fit Would recommend this product.
The Part seems good value for money, it arrived quickly and was very easy to fit.
I had no serous difficulty but was unable to connect element from inside the oven.
Genuine manufacturer part - fitted easily and oven all working great again. Delivery was next day as promised - perfect service, thank you!
How to fit an element
Hi Liam, you can click here to see a video guide on how to replace an oven element.