Next Day Delivery
Order by 4pm
Genuine Parts
Quality guaranteed
UK & Ireland
Fast shipping
Expert Help
Parts advice available
Universal
Stock Code: 601666
£5.79 ex. VAT
General fitting guidance. The exact steps can vary slightly with the make and model of your cooker.
Safety: Switch off and unplug at the mains before you start.
These are universal oven control knobs in white colour. Comes in a set of four with 6 mm, 8 mm, and 14 mm adapters.
The knobs control the heat and the cooking fan inside your oven. Just twist and turn to start activating the controls.
Plus, you can set timers for your baked and roasted creations. This control knob is user-friendly so you can fine-tune everything for precise cooking.
With use and friction, the mechanical or electrical connections within the knob can deteriorate or fail over time. Change it with this replacement part.
These knobs are a universal spare part. Fits nearly all ovens and hobs with spindle type fittings.
Before ordering, please verify that this part is suitable for your model using our compatibility checker.
Low cost, easy to fit and very practical. Would recommend.
Knobs supplied were for my old hob where one of the originals had disintegrated. Unfortunately my spindles were slightly thinner than the smallest adapter supplied but this was overcome by inserting a small flat piece of plastic into the adapter and now works perfectly. Item would probably fit most cookers and hobs using the supplied adapters. Great solid product even though it did need a bit of adjustment to fit mine.
Bought the cooker knobs for my cooker hob. Couldn't buy the original ones as no longer available but these fitted perfect. So good that I ordered another four for the oven and now my cooker looks as good as new. Great product and great service.
Would these fit a creda job model number 42361?
Hi Helene, these universal knobs come with 6mm, 8mm, and 14mm adapters. You'd need to measure the shaft that pushes in to the knob to ensure these would fit.
Hi, on our baumatic B77 gas hob, the small cone shaped plastic sleeves which fit beneath the control knobs have split, making it difficult to light the respective gas rings. Would the cones featured in kit RS601666 serve as suitable replacements?
Hi Roy, these fit the control knobs in the kit, but we wouldn't be able to confirm if they would fit your existing control knob.
Would these fit a Hotpoint Model UH53W S? Thank you.
Hi Vic, these universal knobs come with 6mm, 8mm, and 14mm adapters. If these don't match the spindles you'd need the genuine knobs.
Dear, I have a GAGGENAU HLKG491 (E-NR: KG391210/01) and some of my Knobs are broken. It's your replace valid for my kitchen. Thanks
Hi Jordi, these are universal so you'll need to check the listing and confirm your spindle will fit within either the 6mm, 8mm, or 14mm adapters.
Are these ok to use on gas burners?
Hi Richard, the universal knobs come with 6mm, 8mm, and 14mm adapters, so as long as they will fit on the gas tap they should be fine to work with your gas hob.