Tricity Bendix
Tricity Bendix Cooker & Hob Fan Heating Element3117704001
Suitable for Tricity Bendix, AEG, Blanco, Electra, Electrolux
Stock Code: 81470
·
£15.40inc. VAT
£12.83 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Generates the heat that the fan circulates around the oven.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| F10 | AEG | Means a runaway temperature fault, where the oven has overheated or the control board has read an out of range temperature. It is usually caused by a faulty temperature sensor, a defective control board with a stuck relay, or a wiring fault. | Medium |
| F17 | AEG | Means a communication failure between the induction hob and the main oven control board, or a faulty temperature sensor or NTC thermistor. It is usually caused by a fault in the induction generator, sensor, or control board. | Medium |
| F10 | Electrolux | Means the oven temperature is running away, with the oven overheating or the sensor reading excessive heat often above 500F. It is usually caused by a defective temperature sensor (thermistor) or a faulty main control board. | Medium |
| F131 | Zanussi | Means the steamer sensor temperature is too high on steam-assisted models, triggering a safety alert. It is usually caused by the steamer sensor or control board. | Medium |
F10Medium
AEG
Means a runaway temperature fault, where the oven has overheated or the control board has read an out of range temperature. It is usually caused by a faulty temperature sensor, a defective control board with a stuck relay, or a wiring fault.
F17Medium
AEG
Means a communication failure between the induction hob and the main oven control board, or a faulty temperature sensor or NTC thermistor. It is usually caused by a fault in the induction generator, sensor, or control board.
F10Medium
Electrolux
Means the oven temperature is running away, with the oven overheating or the sensor reading excessive heat often above 500F. It is usually caused by a defective temperature sensor (thermistor) or a faulty main control board.
F131Medium
Zanussi
Means the steamer sensor temperature is too high on steam-assisted models, triggering a safety alert. It is usually caused by the steamer sensor or control board.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your cooker.
Safety: Switch off and unplug at the mains and let it cool before you start.
You’ll needScrewdriverNut driver
- 1
- 2
- 3
- 4
- 5
- 6
- 7
06
Specifications
- Part Number
- 3117704001
- Alternative Part Numbers
- 3110231002, 3110231010, 3113638005, 3116448006
- EAN / Barcode
- 7321428643390
- Genuine Spare Part
- Yes
07
More Details
This is a genuine fan heating element for your oven. Has 3 turns and delivers 2500 watts of power. It measures 223 mm in height and 190 mm in width, with a 140 mm bracket and 95 mm tags.
It pulls in air, heats it, and spreads it evenly through the oven—so your food cooks properly every time.
If your oven’s taking longer to heat, cooking unevenly, or not getting hot enough, the fan element might be the problem. Swap it out with this part.
Check out our video below on how to fit a new one.
This oven fan heating element is from Tricity Bendix. It also fits AEG, Electra, Electrolux, Fagor, Firenzi, John Lewis, Moffat, Parkinson Cowan, and Zanussi cookers and hobs.
Before ordering, please verify that this part is suitable for your model using our compatibility checker.
08
Video
How to Fit a Fan Oven Element
Please note that the following video will give you a guide on how to fit this part, however the exact fitting may differ depending on your make and model.
Safety Warning - Always unplug from the mains before carrying out any repairs.
09
Customer Reviews (143)
5.0143 reviews
5
140
4
3
3
0
2
0
1
0
Sort by:||
New fan oven element
OEM heating element, replaced as original stopped working. Arrived within a few days, fitted all working. Prefer to use OEM as tend to better quality than cheaper replacement parts.
John · Brentwood ·
Quality
Value
Ease of Fitting
Speedy supply - oven back in business
A cold oven is achieving nothing. Simple solution and with speedy delivery of the heating element it was soon back in use.
Trevor Watts · Bristol ·
Quality
Value
Ease of Fitting
Good replacement
When my fan oven element failed, I turned as before to Ransom Spares. As I have used Ransom before I was able to login and view my history. The failed element was the one I ordered from Ransom ten years ago so I reordered the same one that arrived in two days. I removed the old element and fitted the new one in 30mins as it was so easy to do. I really enjoyed my roast pork that evening! There is also a video on Ransom Spares that shows exactly how to remove and fit this type of product.
Doug McNicholas · Whitehaven ·
Quality
Value
Ease of Fitting
Simplistic
I watched a technician replace it last time. I tried to contact him again but he wasn't responding. After a few days I bit the bullet and ordered the part once it arrived I watched a short video on YouTube then executed the replacement. Ideal for people with long arms, as you need to unscrew the back panel of the oven. Hour..all done
Khalid · Leicester ·
Quality
Value
Ease of Fitting
Good product
Product fitted as expected and was delivered on time
Steve · Stonehaven ·
Quality
Value
Ease of Fitting
10
Questions & Answers (3)
Hi , is this the correct element for my Electrolux cooker - Model - EOU6330X Product number- 944171244 Serial number - 5400033 Thanks in advance
Nigel · Weymouth ·
Hi Nigel, I can confirm this is the correct fan oven element for your model.
JordanStaff·
Hello. Looking for a fan oven heating element for bottom oven of a aeg electrolux (model no U3100-4-M) (product no 944171396). Voltage on oven says 230-240V. Which element would be best? Seen some that say suitable for most ovens on but not including my serial number. Just want to know before buy from you. Thanks. Craig
Craig Smith · Leeds ·
Hi Craig, I can confirm this is the correct fan element for your model.
JordanStaff·
Hi just wanted to know, what's the difference between this item and the Fan Heater Element Part number: RS120718 ? I am looking to get this part but just want to make sure I'm getting the right part. Thanks in advance.
Amr Ramadan · Leicester ·
Hi Amr. The difference between these two parts is whether is genuine or not. RS81470 is genuine whereas RS120718 is the patent part. The genuine will come with 12 months warranty but the compatible will come with 6 months warranty.
JackStaff·