Tricity Bendix
Tricity Bendix Cooker & Hob Fan Heating ElementELE4079
Suitable for Tricity Bendix, AEG, Electra, Electrolux, Fagor
Stock Code: 120718
·
£9.75inc. VAT
£8.13 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Generates the heat that the fan circulates around the oven.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| F10 | AEG | Means a runaway temperature fault, where the oven has overheated or the control board has read an out of range temperature. It is usually caused by a faulty temperature sensor, a defective control board with a stuck relay, or a wiring fault. | Medium |
| F17 | AEG | Means a communication failure between the induction hob and the main oven control board, or a faulty temperature sensor or NTC thermistor. It is usually caused by a fault in the induction generator, sensor, or control board. | Medium |
| F10 | Electrolux | Means the oven temperature is running away, with the oven overheating or the sensor reading excessive heat often above 500F. It is usually caused by a defective temperature sensor (thermistor) or a faulty main control board. | Medium |
| F131 | Zanussi | Means the steamer sensor temperature is too high on steam-assisted models, triggering a safety alert. It is usually caused by the steamer sensor or control board. | Medium |
F10Medium
AEG
Means a runaway temperature fault, where the oven has overheated or the control board has read an out of range temperature. It is usually caused by a faulty temperature sensor, a defective control board with a stuck relay, or a wiring fault.
F17Medium
AEG
Means a communication failure between the induction hob and the main oven control board, or a faulty temperature sensor or NTC thermistor. It is usually caused by a fault in the induction generator, sensor, or control board.
F10Medium
Electrolux
Means the oven temperature is running away, with the oven overheating or the sensor reading excessive heat often above 500F. It is usually caused by a defective temperature sensor (thermistor) or a faulty main control board.
F131Medium
Zanussi
Means the steamer sensor temperature is too high on steam-assisted models, triggering a safety alert. It is usually caused by the steamer sensor or control board.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your cooker.
Safety: Switch off and unplug at the mains and let it cool before you start.
You’ll needScrewdriverNut driver
- 1
- 2
- 3
- 4
- 5
- 6
- 7
06
Specifications
- Part Number
- ELE4079
- EAN / Barcode
- 05030017981141
- Genuine Spare Part
- No
07
More Details
This is a high-quality fan heating element for your oven.
With 3 turns and a powerful 2500-watt rating, this fan oven element (225mm x 192mm, 92mm tag spacing) draws in air, heats it up, and distributes it evenly—so your food cooks perfectly all over, every time. Whether you're roasting a chicken or baking brownies, it helps prevent burnt edges and undercooked centres.
If your oven’s slow to heat or leaves meals unevenly cooked, the fan element might be worn out. Swap it out with this replacement part.
Check our video tutorial below on how to fit a new one.
This part fits Tricity Bendix, AEG, Electra, Electrolux, Fagor, Firenzi, John Lewis, Moffat, Parkinson Cowan, and Zanussi cookers and hobs.
Before ordering, please verify that this part is suitable for your model using our compatibility checker.
08
Video
How to Fit a Fan Oven Element
Please note that the following video will give you a guide on how to fit this part, however the exact fitting may differ depending on your make and model.
Safety Warning - Always unplug from the mains before carrying out any repairs.
09
Customer Reviews (93)
4.993 reviews
5
83
4
10
3
0
2
0
1
0
Sort by:||
Perfect
3rd time of buying for a replacement for Electrolux fan oven. The previous one has lasted 5 years before needing replacing. East to fit and works perfectly 😀
Sophie Braithwaite · Ashford ·
Quality
Value
Ease of Fitting
Perfect 👌
Needed a part for my 26 year old electric Zanussi oven and located the correct part on the Ransom Spares website without any fuss. Price is amazing as is the speed of despatch. Part arrived and is perfect in every way, fit and function is excellent. I will definitely recommend getting your spare parts from RansomSpares.
Tony Cuschera · Oldham ·
Quality
Value
Ease of Fitting
Heating Element
The part was the correct one after using the site to find the correct part for the make and model of the cooker. It arrived ahead of the esitmated date, I fitted it myself as I am an electrician, it is easy but you must make sure the power is isolated. It works perfectly and on the whole was very a cheap fix to get the oven working. Excellent communication from Ransomspares. 5/5 across all the boards. Will definately use them again.
Steve Boyden. · Westcliff-on-Sea ·
Quality
Value
Ease of Fitting
Good product, quite easy to fit.
Electrical tags in correct place for my cooker. Not all attachment points around the element aligned with existing cooker screw holes but enough to firmly secure the item.
David Martin · Bristol ·
Quality
Value
Ease of Fitting
Oven like new
Replaced the element with this in. And now the oven is heating up like brand new again. Thankyou.
Nigel Woodeson · NEWMARKET ·
Quality
Value
Ease of Fitting
10
Questions & Answers (1)
Hi, Good afternoon. My oven (Moffat MSF 610W) stopped working. The fan comes on, however the oven does not heat up. I suspect it is the Element that is faulty. Please advise, what part number I would require. Serial number of my appliance is 54628137. Regards. Danny.
Danny · Leicester ·
Hi Danny, although we cannot be 100% certain that replacing the element will fix your oven, it is the most likely component that causes the fault you describe. Take a look at our video on how to replace an oven element for more information. The part number you require is RS82802.
SamStaff·