Call Us
Login
Basket
Choose your brand from the list below to check your model compatibility.
Start typing your model number below to check compatibility.
INDESIT OVEN FAN MOTOR
4.8 out of 5 customer rating
Read review(s) | Read customer question(s)
Our Part Number: RS141543
In Stock Next Day Delivery Available
Category: Cookers & Hobs
Our Price
£27.70
Genuine Spare Part
Next Day Delivery Available
Is this part compatible with my appliance?
Part is compatible with 
We are unable to confirm if this part will fit with model number ""Details / Specifications
This replacement oven fan motor is suitable for Ariston, Cannon, Creda, Hotpoint, and Indesit cookers. Found inside your oven at the rear it should spin around moving the hot air for even cooking results.
How to Replace & Fit an Oven Fan Motor:
The following DIY repair video should assist you in fitting this part. However the exact procedure may differ depending on your make and model.
Safety Warining - Always unplug from the mains before carrying out any repairs.
Latest Product Review(s)
Read All Reviews
63 Customer Review(s)
Slightly different and easy'ish to install
By Pompey Paul - Portsmouth - 10th Apr 2021
The main fabric of the item is identical but spade connectors are different locations. Also the fan blade itself and the nut that held it didnt fill me with confidence as seemed cheap. I had a double oven so was a two man lift to get it out so I could remove the back of the oven to gain access, this was the hardest thing about replacing the fan but if you have a smaller under-counter oven then I'm sure it would be easier like the "how-to" videos on the Ransom spares website
GREAT PRODUCT
By KATHRYN HEWSON - GLOUCESTER - 7th Apr 2021
I really can't fault Ransom Spares. They have always got the part I need. They're efficient, reasonably priced and excellent at delivery.
Hotpoint oven fan easy to install
By Phil - Pembrokeshire - 24th Mar 2021
Excellent service ,part as described,arrived early Highly recommend.
Fixed my oven. Like new again.
By Stephen Hunter - Kinross - 11th Mar 2021
After noticing our oven fan had become reluctant to start, I looked at how to fix it. Ransom’s great “how to do it” video showed it was perfectly doable, and the new fan was very reasonably priced and looked identical to the original. The part arrived on time, fitting was as per the video and it has completely restored the oven. Way to go. Thanks Ramsom.
Good value and easy to fit following online video
By David Foss-Smith - Brightlingsea - 22nd Oct 2020
Had forgotten I used Ransomespares in the past. They are very good value compared to manufacturers spare parts. The motor arrived loose in a cardboard box but was in damaged. The wiring colours differed from those on the fan being replaced but otherwise very easy to fit. The fan works and no need to replace the oven! No expensive repair charges either. So all in all very happy!
Hotpoint oven fan
By Mike Jones - Melksham - 26th Jun 2020
HI! I have a hotpoint double oven DH93CX. The fan in the back of the oven would stick until the oven was hot so sourced a new unit from Ransoms Spares. New fan looked very similar to old unit and had the same connections and after removing the oven from the cabinet the new fan fitted in easily. The connectors were at a slightly different angle but still connected properly. £0 minutes and the oven was back in and working. thanks Mike Jones
Excellent product
By Frederick Green - Birmingham - 4th Jun 2020
Excellent product, like for like easy to fit and very good value.
Easy to fit
By Manning - Northampton - 30th May 2020
Easy to fit, great product at a great price. Very good service and delivery.
Great value
By Dave frankish - Bridlington - 22nd May 2020
Great value for a genuine item. Prompt delivery meant we were up and running in no time. Great service Ransoms.
No problem
By Kevin Dillon - Worcester Park - 20th May 2020
The part arrived quickly and was an easy fit, can't fault the part can't fault the service.
Questions And Answers
2 Answer(s)
In the picture the electrical connections look different to those shown on the Hotpoint page for the equivalent Hotpoint DY46X/2 part (Hotpoint part no J00156111). But it is described as a genuine spare part. Can you clarify why it appears to be different, please. Many thanks.
A
Hi Iain. This is the only fan motor listed for your appliance. This will be correct though the connectors have changed slightly.
A
Hi Iain. This is the only fan motor listed for your appliance. This will be correct though the connectors have changed slightly.
1 Answer(s)
I own a creda concept solar plus model number 48317 / 8 the fan motor stalls / stops easliy i ve investigated to find numbers etc after watching your video to replace motor fan etc i noticed my creda oven has two fans one inside the oven cabinate and another fan on the outer side please advise is this motor assembly correct for my model Thanks Trevor Ford
A
Hi Trevor, the oven fan motor for your model is RS18642.
1 Answer(s)
Hiya , purchased this motor , slightly different connectors for + - on old motor there on opposite sides
On thiss one there in a block together
With no mark for + or - so which is which
Thanks
A
Hi Martin, please submit a part enquiry including all your model details so we can check this for you.
1 Answer(s)
My question is the same as Martin's from bath for this part, the model cooker is Hotpoint hue61 k
A
Hi John, please submit a part enquiry with the full model details inside the cooker so I can look in to this for you.
1 Answer(s)
I tried to buy a replacement for this. They all seem to have a backplate to fan mount length 20mm the one in the over is 10mm. 20mm the fan fouls the cover. Will this one fit or can I get long spacers for the fan cover.
A
Hi Stephen, please submit a part enquiry including your full model details from inside the cooker so we can locate the correct motor.
