Next Day Delivery
In-stock parts · order by 4pm
Genuine Parts
Quality guaranteed
UK & Europe
Fast shipping
Expert Help
Parts advice available
Hotpoint
Suitable for Hotpoint, Ariston, Belling, Cannon, Cookers
Stock Code: 9351
£22.46 ex. VAT
It can be very frustrating when your oven fan motor fails. Ransom Spares will quickly deliver replacement motors so your kitchen is back in full working order as soon as possible.
This motor can be used in Ariston, Belling, Cannon, Cookers, Creda, Homark, Hotpoint, Indesit, Jackson and Wrighton cookers / hobs.
The fan motor was easy to fit. Fitted it in five mins then realized the positive wires wouldn't reach the connectors so took out the three screws turned the motor around till the wires would reach. Weellll, you live and learn. LOL. I think it took longer to take the rear panel off than replace the fan & motor. For some strange reason, I struggled like a don't what getting back on, when in the past when I've replaced the grill elements I've got it back on in minutes. Just need to sort out my fridge. It doesn't seem to be cold enough, drinks are cool but not cold. I've cleaned out the drain plug to the rear with that little plastic clean that's left in the drain hole. There is no clicking sound from the relay near the dispenser as that hums nicely. So it looks like a new fridge. LOL. Thanks for the parts.
Great value product-saved me £40 from part offered by another supplier.Prompt delivery and fitted it in 15 mins .Great value all round as was other parts previously purchased from Ransomes.
I replaced this by removing both the back of the cooker and the oven internal rear lining. It was a pretty good fit, leaving just a bit of a gap above the top screw. Definitely worth ordering a new Fan Motor Insulation Plate at the same time. It is so nice to have a quiet oven!
Brilliant service, ordered in the afternoon arrive next day, oven up and running by lunchtime. The online catalogue was easy to use, and clear about the part suitability for our cooker . I would order again from Ransom.
Despite awkward panels access, it was comparatively straight-forward to dismantle & replace the motor. Good product and functioning well. [Hint: take a photo of connections with mobile phone to ensure correct re-connection - my replacement motor's bolts location were about 60ºout of line with holes].
If my fan doesn’t work can I still use the cooker without causing any damage
Hi Terry, this motor helps spread the heat evenly. It will still work without this, but the food may not cook as well.
Hi. Could i use this in an Indesit fimu23ixs, in place of original fan (part no. RS141543)?
Hi Chris, unfortunately this motor isn't compatible as the spindle is too short.