Hotpoint Cooker & Hob Compatible Grill Element - HalfELE002

Easy to replace the old warped heating element, plugged this in and all working properly again.

This Element was the cheapest on line & good quality

Fitting this part is really easy. Turn off power to cooker. The process is possible with the oven door in place but easier if one removes it. Remove top oven door (below), shelf and grill pan. Remove one screw with cross head screwdriver. Pull element forward, put twist ties between the two wires and unclip. Remove old element. Insert new element, clip on wires then remove ties (these are to avoid losing a wire inside the cooker!) Push element into place and insert screw. Replace door, shelf and grill pan. Turn on power. Really simple. To remove door (not in cooker instructions); open door fully, twist discs in hinges to lock hinge bars, pull back hinged locking loops (right against cooker upright and hard to see). Lift out door. Reverse to replace.

Good product and very easy to fit, only downside was slightly less watts than old ones but this doesn't seem to affect preformance.

Delivered promptly. Part was easy to fit in my Creda Double Oven from the front, no need to remove cooker to access the rear. Good value, well made OEM part.