Electrolux
Electrolux Cooker & Hob Fan Oven Element 2400w652514
Suitable for Electrolux, AEG, Elektro Helios, Faure, Husqvarna Electrolux
Stock Code: 1085461
£12.70inc. VAT
£10.58 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Generates the heat that the fan circulates around the oven.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| F10 | AEG | Means a runaway temperature fault, where the oven has overheated or the control board has read an out of range temperature. It is usually caused by a faulty temperature sensor, a defective control board with a stuck relay, or a wiring fault. | Medium |
| F17 | AEG | Means a communication failure between the induction hob and the main oven control board, or a faulty temperature sensor or NTC thermistor. It is usually caused by a fault in the induction generator, sensor, or control board. | Medium |
| F10 | Electrolux | Means the oven temperature is running away, with the oven overheating or the sensor reading excessive heat often above 500F. It is usually caused by a defective temperature sensor (thermistor) or a faulty main control board. | Medium |
| F131 | Zanussi | Means the steamer sensor temperature is too high on steam-assisted models, triggering a safety alert. It is usually caused by the steamer sensor or control board. | Medium |
F10Medium
AEG
Means a runaway temperature fault, where the oven has overheated or the control board has read an out of range temperature. It is usually caused by a faulty temperature sensor, a defective control board with a stuck relay, or a wiring fault.
F17Medium
AEG
Means a communication failure between the induction hob and the main oven control board, or a faulty temperature sensor or NTC thermistor. It is usually caused by a fault in the induction generator, sensor, or control board.
F10Medium
Electrolux
Means the oven temperature is running away, with the oven overheating or the sensor reading excessive heat often above 500F. It is usually caused by a defective temperature sensor (thermistor) or a faulty main control board.
F131Medium
Zanussi
Means the steamer sensor temperature is too high on steam-assisted models, triggering a safety alert. It is usually caused by the steamer sensor or control board.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your cooker.
Safety: Switch off and unplug at the mains and let it cool before you start.
You’ll needScrewdriverNut driver
- 1
- 2
- 3
- 4
- 5
- 6
- 7
06
Specifications
- Part Number
- 652514
- Alternative Part Numbers
- 140089339059, 3878684004, 3878684103
- Genuine Spare Part
- No