Will This Part Fit My Appliance?

Choose your brand from the list below to check your model compatibility.

Start typing your model number below to check compatibility.

Description

What is the function of a fan motor in an oven?

The fan motor drives the fan which circulates hot air inside the oven for a more dependable and accurate cooking. It also reduces hot and cold zones.

It’s close to the fan assembly and gives the necessary mechanical force to sustain the rotation of the fan blades and a steady airflow.

How do you know when your oven fan motor needs replacement?

Replace your oven's fan motor if the fan or motor begins to produce excessive noise, such as grinding, rattling, or screeching. Inadequate hot air circulation gives you uneven cooking outcomes or prolonged cooking times, even with correct settings. 

Is it easy to install in place? 

Yes. See our video tutorial below on how to replace and fit a fan motor.

This fan motor is a genuine Hotpoint oven replacement part. It also fits Ariston, Belling, Cannon, Creda, Export, Hotpoint, Indesit, Jackson, Whirlpool, and Wrighton cookers and hobs.

How to Replace & Fit an Oven Fan Motor:

The following DIY repair video should assist you in fitting this part.  However the exact procedure may differ depending on your make and model.

WarningSafety Warning - Always unplug from the mains before carrying out any repairs.

Latest Product Review(s)

Read All Reviews
85 Customer Review(s)

Good Product

Great product, great price and it worked. Fast delivery too.

By G Wickenden - Melksham
14th Mar 2024

Overall

Quality

Value

Ease of Fitting

Great product easy to fit

Fast delivery and excellent product. Very helpful video as well

By James pottinger - Cardiff
29th Feb 2024

Overall

Quality

Value

Ease of Fitting

Perfect

Perfect 👌 fitted instead of the official hot point one and it was exactly the same at a fraction of the price!

By Jemma - Worcester
12th Feb 2024

Overall

Quality

Value

Ease of Fitting

Great product, easy to fit

Competitively priced oven fan (half the price quoted on other sites) Ordered on a Friday afternoon, it arrived on less than 24 hours later on a Saturday. It was Identical to the original part so was easy to fit. Great service. Would order again.

By Andrew Colley - Rochester
10th Feb 2024

Overall

Quality

Value

Ease of Fitting

Easy to fit Good quality products

Fitted a new Hotpoint oven fan in less than an hour.Delivery from Randoms was prompt and on time . A really excellent quality company will definitely be using them again for spares.

By Donald Patience - Horsham
17th Jan 2024

Overall

Quality

Value

Ease of Fitting

Great product, BUT …..

This was a great replacement part for my hotpoint cooker. BUT if you are using it to replace an original fan motor (ours was a 2017 fan oven) the contact connections have changed slightly and there are no instructions in the box to highlight this. If you are a DIY person, this can be confusing. Other than this shortsightedness, it’s a great product.

By Ross Dilnot - Milton Keynes
10th Jan 2023

Overall

Quality

Value

Ease of Fitting

Excellent replacement part

I bought this part for my sisters Indesit oven which had stopped working. I’ve previously bought heating elements for this oven from this site so I was confident about the part number being compatible. Annoyingly I didn’t check the rear of the oven first to check the fitting as when I went to fit the part the insulation gasket disintegrated, so I then had to order a new one before I could fit the fan. But all good now and working fine.

By Peter Horton - Christchurch
24th Aug 2022

Overall

Quality

Value

Ease of Fitting

Fabulous service

Ordered this part on the portal easily, and it came within 5 days which was absolutely fine. I've dealt with Ransome Spares in Yeovil a few times, and their staff are knowledgeable and very helpful. Would always try here first.

By Elaine - Halifax
26th Jan 2022

Overall

Quality

Value

Ease of Fitting

Great service

Ordered fan along an with element and insulation ordering easy and easy to use website Ordered for next day delivery but let down by post office who sent to wrong distribution centre delivery refunded by Ransomespares immediately Fantastic service Also Ordered thermostat day after arrived within 24 hours as promised

By Viv Lewis - Milton Keynes
3rd Jan 2022

Overall

Quality

Value

Ease of Fitting

Great Product, Excellent Service

Ordered Replacement Oven Fan and Gasket for my Cannon Dual Fuel Free Standing Cooker 16th. November 2021. Delivered by Royal Mail 18th. Nov as promised. Watched Ransom video demonstrating how to remove and replace the fan assembly - very useful especially about the nut securing the fan being a left hand thread. 2nd. December installed new fan and gasket which were identical to those I removed. Being a dual fuel cooker I had to disconnect the gas supply using the quick disconnect coupling before unscrewing the flexible pipe from the cooker to remove the back panel to gain access to the fan. New PTFE tape was applied to the threaded connection before tightening as per its original installation and bubble tested for leaks. I spun the fan by hand to confirm clearance between it and the mounting screw heads before installing the cover. One blade must have got slightly bent during installation and needed minor easing to clear the screw heads. Both myself and the wife are pleased with how easy and economically it was to replace a noisy/failing fan and have a fully functioning cooker.

By Paul Holden - Ruislip
3rd Dec 2021

Overall

Quality

Value

Ease of Fitting

Load More Reviews

Questions And Answers

2 Answer(s)
In the picture the electrical connections look different to those shown on the Hotpoint page for the equivalent Hotpoint DY46X/2 part (Hotpoint part no J00156111). But it is described as a genuine spare part. Can you clarify why it appears to be different, please. Many thanks.
By Iain - Edinburgh - 05/01/2019
Hi Iain. This is the only fan motor listed for your appliance. This will be correct though the connectors have changed slightly.
By Jack - 05/01/2019
Hi Iain. This is the only fan motor listed for your appliance. This will be correct though the connectors have changed slightly.
By Jack - 05/01/2019
1 Answer(s)
I own a creda concept solar plus model number 48317 / 8 the fan motor stalls / stops easliy i ve investigated to find numbers etc after watching your video to replace motor fan etc i noticed my creda oven has two fans one inside the oven cabinate and another fan on the outer side please advise is this motor assembly correct for my model Thanks Trevor Ford
By Trevor - Derbyshire - 12/04/2020
Hi Trevor, the oven fan motor for your model is RS18642.
By Jordan - Staff Member
1 Answer(s)
Hiya , purchased this motor , slightly different connectors for + - on old motor there on opposite sides On thiss one there in a block together With no mark for + or - so which is which Thanks
By Martin - Bath - 20/06/2020
Hi Martin, please submit a part enquiry including all your model details so we can check this for you.
By Jordan - Staff Member
1 Answer(s)
My question is the same as Martin's from bath for this part, the model cooker is Hotpoint hue61 k
By John Ronald - Newcastle upon Tyne - 03/08/2020
Hi John, please submit a part enquiry with the full model details inside the cooker so I can look in to this for you.
By Jordan - Staff Member
1 Answer(s)
I tried to buy a replacement for this. They all seem to have a backplate to fan mount length 20mm the one in the over is 10mm. 20mm the fan fouls the cover. Will this one fit or can I get long spacers for the fan cover.
By Stephen - LEWES - 09/04/2021
Hi Stephen, please submit a part enquiry including your full model details from inside the cooker so we can locate the correct motor.
By Jordan - Staff Member

Be the first to ask a question for this product.

Ask a new question

Customers Also Viewed