0333 300 1293

Phone Lines Open Mon - Fri 10 am - 4.30 pm (excluding bank holidays)

CREDA OVEN FAN HEATER ELEMENT 2500W

4.7 out of 5 customer rating

Read review(s) | Read customer question(s)

Our Part Number: RS120626

Usually despatched within 3 working days

Category: Cookers & Hobs

Our Price

£9.95

Please correct the errors and try again.
 

Is this part compatible with my appliance?

Choose your brand from the list below to check your model compatibility.

Details / Specifications

The Compatible Fan Element is an easy and economic replacement for a selected range of Belling, Jackson, Creda, Cannon, and Hotpoint cookers and ovens. After the fan element is heated up to a desired temperature, the electricity flows in an on-off pattern thus building up the required heat inside the oven. If your oven has stopped heating up, the possible reasons can single out the replacement with this circular turbo element.

Specifications

  • Wattage 2500
  • Width: 235mm
  • Length: 235mm
  • Tag centres: 38mm

How to Fit a Fan Oven Element

Please note that the following video will give you a guide on how to fit this part, however the exact fitting may differ depending on your make and model.

WarningSafety Warining - Always unplug from the mains before carrying out any repairs.

Latest Product Review(s)

Read All Reviews
230 Customer Review(s)

Perfect part for the job

By Keith Borton - Sale, Gtr manchesterSale - 15th Dec 2020

The element was easy to fit and has worked well since (though not used much). I have complete faith in Ransom Spares and I feel sure it will outlast the oven.

Overall

Quality

Value

Ease of Fitting

Perfect for Hotpoint EW 81P

By Juliette Porter - Bromsgrove - 6th Dec 2020

Our freestanding main oven failed to heat up. We weren't sure if it was the element or thermostat at fault. Ransom Spares had this compatible element available at a very reasonable price, so it was worth just buying it to see if it made a difference...and it did. We weren't sure how to fit it at first and tried taking the back off. This didn't look right, so we decided to take off the inner back panel which easily revealed the element. It was a 2 minute job to snap the old one out and pop the new one in. We secured it from inside and, as the back was already off, from the rear. We screwed the inner back plate back into position and it all worked brilliantly. There was a little vibration at first but simply tightening the screws more resolved this. We are so grateful to Ransom Spares for making this affordable repair possible. We have bought other spares from Ransom, and each time, we've been similarly impressed by the items and the service. Thank you.

Overall

Quality

Value

Ease of Fitting

Does the job, slightly different size

By Tom - Southampton - 18th Nov 2020

Few months later and it's working fine still. (So can't really comment on long term quality, but seems good enough.) We have a Creda X155EK, and it's meant to be compatible. It was almost the same size as the original, but not quite (a bit bigger). There's an extra support for the bottom of the element that's screwed to the back of the oven that didn't fit with this one, so I had to drill a new hole in the metal back to screw the support into. Easy enough to do, but note you might need a drill & a small metal bit.

Overall

Quality

Value

Ease of Fitting

Great product

By Dennise McAuley - Belfast - 10th Nov 2020

Really easy to fit this product and at half the price of other websites was a fab buy.

Overall

Quality

Value

Ease of Fitting

Perfect for the job

By Robert Gibbs - Barnsley - 19th Sep 2020

Heater element was delivered quickly and fitted with no issues. Good product and at a great price.

Overall

Quality

Value

Ease of Fitting

Easy swap

By Mr Shane Wallace - Highbridge - 3rd Sep 2020

perfect replacement part. It was exactly the same as part I removed to just clipped straight in. Many thanks.

Overall

Quality

Value

Ease of Fitting

Great replacement item

By Mandie Cutler - Sutton - 16th Aug 2020

Great replacement item, looks exactly the same as the old one. Fitted it easily and have an oven that works like new now. Would definitely recommend mending oven if you can, it's easier than you think.

Overall

Quality

Value

Ease of Fitting

Very happy

By Emma poole - Peterborough - 4th Jul 2020

Very quick delivery,replaced the element in 5 minutes,very happy with service

Overall

Quality

Value

Ease of Fitting

Good Value Product

By William Mullings - Worthing - 15th Jun 2020

Unit was easy to fit and there were no compatibility issues. Oven now back in good working order and reaching set temperatures as good as when new.

Overall

Quality

Value

Ease of Fitting

Spot on part

By Adrian Bennet - Wolverhampton - 9th Jun 2020

Main oven element .bargain price . Quick delivery . 5 min job to fit

Overall

Quality

Value

Ease of Fitting

Read All Reviews

Questions And Answers

Be the first to ask a question for this product.

Ask a new question