0333 300 1293

Phone Lines Open Mon - Fri 10 am - 4.30 pm (excluding bank holidays)

CANNON OVEN FAN MOTOR

5.0 out of 5 customer rating

Read review(s) | Read customer question(s)

Our Part Number: RS141543

In Stock Next Day Delivery Available

Category: Cookers & Hobs

Our Price

£27.70

Please correct the errors and try again.
 
Genuine Spare Part
Genuine Spare Part
Genuine Spare Part
Next Day Delivery Available
More About Delivery

Is this part compatible with my appliance?

Choose your brand from the list below to check your model compatibility.

Details / Specifications

This replacement oven fan motor is suitable for Ariston, Cannon, Creda, Hotpoint, and Indesit cookers.  Found inside your oven at the rear it should spin around moving the hot air for even cooking results.

How to Replace & Fit an Oven Fan Motor:

The following DIY repair video should assist you in fitting this part.  However the exact procedure may differ depending on your make and model.

WarningSafety Warining - Always unplug from the mains before carrying out any repairs.

Latest Product Review(s)

Read All Reviews
76 Customer Review(s)

Great Product, Excellent Service

By Paul Holden - Ruislip - Today

Ordered Replacement Oven Fan and Gasket for my Cannon Dual Fuel Free Standing Cooker 16th. November 2021. Delivered by Royal Mail 18th. Nov as promised. Watched Ransom video demonstrating how to remove and replace the fan assembly - very useful especially about the nut securing the fan being a left hand thread. 2nd. December installed new fan and gasket which were identical to those I removed. Being a dual fuel cooker I had to disconnect the gas supply using the quick disconnect coupling before unscrewing the flexible pipe from the cooker to remove the back panel to gain access to the fan. New PTFE tape was applied to the threaded connection before tightening as per its original installation and bubble tested for leaks. I spun the fan by hand to confirm clearance between it and the mounting screw heads before installing the cover. One blade must have got slightly bent during installation and needed minor easing to clear the screw heads. Both myself and the wife are pleased with how easy and economically it was to replace a noisy/failing fan and have a fully functioning cooker.

Overall

Quality

Value

Ease of Fitting

very easy to fit

By T.C.KNIGHT - Ipswich - 2nd Nov 2021

The part was delivered very quick and was fitted and working in less than an hour Great service again.

Overall

Quality

Value

Ease of Fitting

Simplicity itself - easy to fit

By Rob Andrew - Welwyn Garden City - 12th Oct 2021

Easy to find the genuine replacement fan, good price and prompt delivery. The fan was easy to fit, after watching a YouTube video. Completed job in under 30 minutes, including removing the oven from the integrated surround unit.

Overall

Quality

Value

Ease of Fitting

Very pleased

By Alan Brain - Aylesford - 1st Oct 2021

Arrived quickly and the how to fit online video was a great help.

Overall

Quality

Value

Ease of Fitting

Excellent price, does the job

By John Pearce - Bristol - 14th Jul 2021

Although it is not exactly the same as the original one, it fitted fine (realising that the nut holding the fan is left-handed) and the price was excellent being a lot less than other suppliers. Would recommend.

Overall

Quality

Value

Ease of Fitting

Great value product

By Ivor Connell - Hitchin - 13th Jul 2021

The fan motor was as advertised and an exact replacement for the old one. It was easy to fit and is working fine. Great value. I will order from Ransom Spares again.

Overall

Quality

Value

Ease of Fitting

So simple

By Steve - Devon - 29th Jun 2021

Part arrived promptly. Well I never thought I could repair an oven but so simple after watching video. Saved a fortune on calling someone out. My oven now works perfectly and is really quiet.

Overall

Quality

Value

Ease of Fitting

Easy to fit

By Mr Peter A Price - Darlington - 21st May 2021

well done thanks for the part it was a good product :)

Overall

Quality

Value

Ease of Fitting

Review

By Carla Graves - Essex - 19th May 2021

Great part, easy to put in and works well. Would use again!

Overall

Quality

Value

Ease of Fitting

Excellent

By KEITH DAVIES - CHESTERFIELD - 10th May 2021

Speedy delivery and easy to fit by DIY amateur. Simple to fit once double cooker was removed from cupboard housing. Would suggest the fan motor insulation plate between fan and oven replaced at the same time as the pads are fairly brittle - I'm not sure why they are so easy to damage and that product could be improved. Would definitely use this company again.

Overall

Quality

Value

Ease of Fitting

Read All Reviews

Questions And Answers

2 Answer(s)
In the picture the electrical connections look different to those shown on the Hotpoint page for the equivalent Hotpoint DY46X/2 part (Hotpoint part no J00156111). But it is described as a genuine spare part. Can you clarify why it appears to be different, please. Many thanks.
By Iain - Edinburgh - 05/01/2019
A
Hi Iain. This is the only fan motor listed for your appliance. This will be correct though the connectors have changed slightly.
By Jack - Staff Member
A
Hi Iain. This is the only fan motor listed for your appliance. This will be correct though the connectors have changed slightly.
By Jack - Staff Member
1 Answer(s)
I own a creda concept solar plus model number 48317 / 8 the fan motor stalls / stops easliy i ve investigated to find numbers etc after watching your video to replace motor fan etc i noticed my creda oven has two fans one inside the oven cabinate and another fan on the outer side please advise is this motor assembly correct for my model Thanks Trevor Ford
By Trevor - Derbyshire - 12/04/2020
A
Hi Trevor, the oven fan motor for your model is RS18642.
By Jordan - Staff Member
1 Answer(s)
Hiya , purchased this motor , slightly different connectors for + - on old motor there on opposite sides On thiss one there in a block together With no mark for + or - so which is which Thanks
By Martin - Bath - 20/06/2020
A
Hi Martin, please submit a part enquiry including all your model details so we can check this for you.
By Jordan - Staff Member
1 Answer(s)
My question is the same as Martin's from bath for this part, the model cooker is Hotpoint hue61 k
By John Ronald - Newcastle upon Tyne - 03/08/2020
A
Hi John, please submit a part enquiry with the full model details inside the cooker so I can look in to this for you.
By Jordan - Staff Member
1 Answer(s)
I tried to buy a replacement for this. They all seem to have a backplate to fan mount length 20mm the one in the over is 10mm. 20mm the fan fouls the cover. Will this one fit or can I get long spacers for the fan cover.
By Stephen - LEWES - 09/04/2021
A
Hi Stephen, please submit a part enquiry including your full model details from inside the cooker so we can locate the correct motor.
By Jordan - Staff Member
1 Answer(s)
Hi this part looks slightly broader than the part on my cooker ... can you please confirm that this part fits Hotpoint HUI614k
By Angela - Belfast - 18/06/2021
A
Hi Angela, please submit a part enquiry including the full model details from the rating plate inside the cooker so we can confirm the correct motor.
By Jordan - Staff Member
1 Answer(s)
Hi, the connection is different than the old.one, how can I know which side is the live and which side is neutral?
By Thomas - BATH - 27/11/2021
A
Hi Thomas, this won't matter which way around the wires are connected.
By Jordan - Staff Member

Be the first to ask a question for this product.

Ask a new question