Bosch
Bosch Cooker & Hob Power Cord Lead 1.2m00754544
Suitable for Bosch, Balay, Blaupunkt, Constructa, Junker
Stock Code: 852680
£9.20inc. VAT
£7.67 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Carries the mains power into the oven.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| ER0 | Bosch | Means a communication error, an electronic system failure, or a control board malfunction. It is usually caused by a failed PCB, particularly when the fault persists after a reset. | Medium |
| ER2 | Bosch | Means a faulty mains connection, where the supply voltage is incorrect, unstable, or out of the normal operating range. It is usually caused by an unstable mains supply or a faulty control module. | Medium |
| ER9 | Bosch | Means a power failure has been detected, where the oven lost power unexpectedly and then recovered. It is usually caused by an interruption to the power supply, often requiring a manual reset to clear the display. | Medium |
| E1 | Neff | Means there is an internal electronics fault on the power board, touch control, or a sensor. It is usually caused by overheating, a faulty internal connection, or water spillage. | Medium |
| E16 | Neff | Means there is a control board memory fault on ovens and microwaves, or a water inlet fault on dishwashers. It is usually caused by a control board failure, or on dishwashers the water inlet valve not closing properly. | Medium |
| E4 | Neff | Means there is a voltage fault, incorrect installation, or a temperature sensor problem. It is usually caused by power supply problems on induction hobs, or a faulty temperature sensor on ovens. | Medium |
| E9 | Neff | Means the hob electronics are not receiving correct power or the power module cannot communicate with the control board. It is usually caused by a faulty power supply, an internal communication failure, or a control board malfunction. | Medium |
| E900 | Neff | Means the cooktop operating voltage is incorrect or outside the normal range. It is usually caused by a power supply error. | Medium |
| ER3 | Neff | Means there is a temperature sensor fault or overheating on induction hobs, while the F3 form on ovens represents an electrical fault. It is usually caused by a temperature sensor fault, overheating, or an electrical fault. | Medium |
| F6 | Neff | Means there is a communication fault between the power boards and the touch control board. It is usually caused by overheating or electrical issues. | Medium |
| U400 | Neff | Means there is a serious connection fault, with the hob not connected to the power supply correctly. It is usually caused by an incorrect power connection, incorrect voltage, or a communication failure between the control board and power module. | Medium |
ER0Medium
Bosch
Means a communication error, an electronic system failure, or a control board malfunction. It is usually caused by a failed PCB, particularly when the fault persists after a reset.
ER2Medium
Bosch
Means a faulty mains connection, where the supply voltage is incorrect, unstable, or out of the normal operating range. It is usually caused by an unstable mains supply or a faulty control module.
ER9Medium
Bosch
Means a power failure has been detected, where the oven lost power unexpectedly and then recovered. It is usually caused by an interruption to the power supply, often requiring a manual reset to clear the display.
E1Medium
Neff
Means there is an internal electronics fault on the power board, touch control, or a sensor. It is usually caused by overheating, a faulty internal connection, or water spillage.
E16Medium
Neff
Means there is a control board memory fault on ovens and microwaves, or a water inlet fault on dishwashers. It is usually caused by a control board failure, or on dishwashers the water inlet valve not closing properly.
E4Medium
Neff
Means there is a voltage fault, incorrect installation, or a temperature sensor problem. It is usually caused by power supply problems on induction hobs, or a faulty temperature sensor on ovens.
E9Medium
Neff
Means the hob electronics are not receiving correct power or the power module cannot communicate with the control board. It is usually caused by a faulty power supply, an internal communication failure, or a control board malfunction.
E900Medium
Neff
Means the cooktop operating voltage is incorrect or outside the normal range. It is usually caused by a power supply error.
ER3Medium
Neff
Means there is a temperature sensor fault or overheating on induction hobs, while the F3 form on ovens represents an electrical fault. It is usually caused by a temperature sensor fault, overheating, or an electrical fault.
F6Medium
Neff
Means there is a communication fault between the power boards and the touch control board. It is usually caused by overheating or electrical issues.
U400Medium
Neff
Means there is a serious connection fault, with the hob not connected to the power supply correctly. It is usually caused by an incorrect power connection, incorrect voltage, or a communication failure between the control board and power module.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your cooker.
Safety: Switch off and unplug at the mains before you start.
You’ll needScrewdriver
- 1
- 2
- 3
- 4
- 5
- 6
06
Specifications
- Part Number
- 00754544
- Alternative Part Numbers
- 00754542
- Genuine Spare Part
- Yes
07
More Details
This is a genuine power cord lead for your oven. Measures 1.2 metres long.
Connects the oven to the power source for a steady supply of electricity. It’s built to handle high electrical loads safely.
Signs of damage to an oven power cord lead include frayed wires, exposed metal, scorch marks, or a loose connection at the plug or appliance. You may also notice the cord overheating or causing the oven to lose power intermittently. You should replace it promptly with this spare part.
This power cord lead for your oven is from Bosch. Also fits Balay, Blaupunkt, Bosch, Constructa, Junker, Lord, Neff, Pitsos, Siemens, and Viva cookers and hobs.
Before ordering, please verify that this part is suitable for your model using our compatibility checker.
08
Customer Reviews (1)
5.01 review
5
1
4
0
3
0
2
0
1
0
Ransom spares
This is the 2/3 part I've ordered and it has saved me a fortune. I've spent £150 to repair & restore as good as new £3500 of high end cookers & freezers. Excellent
J.m · Nottingham ·
Quality
Value
Ease of Fitting