Call Us
Login
Basket
Choose your brand from the list below to check your model compatibility.
Start typing your model number below to check compatibility.
BELLING OVEN FAN HEATER ELEMENT 2500W
4.7 out of 5 customer rating
Read review(s) | Read customer question(s)
Our Part Number: RS120626
In Stock Next Day Delivery Available
Category: Cookers & Hobs
Our Price
£9.95
Next Day Delivery Available
Is this part compatible with my appliance?
Part is compatible with 
We are unable to confirm if this part will fit with model number ""Details / Specifications
The Compatible Fan Element is an easy and economic replacement for a selected range of Belling, Jackson, Creda, Cannon, and Hotpoint cookers and ovens. After the fan element is heated up to a desired temperature, the electricity flows in an on-off pattern thus building up the required heat inside the oven. If your oven has stopped heating up, the possible reasons can single out the replacement with this circular turbo element.
Specifications
- Wattage 2500
- Width: 235mm
- Length: 235mm
- Tag centres: 38mm
How to Fit a Fan Oven Element
Please note that the following video will give you a guide on how to fit this part, however the exact fitting may differ depending on your make and model.
Safety Warining - Always unplug from the mains before carrying out any repairs.
Latest Product Review(s)
Read All Reviews
232 Customer Review(s)
Excellent product
By Susan Tague - Grantown-on-Spey - 30th Mar 2021
The element broke in my Belling Format 644 and whilst it may be an older cooker I didn't want to fork out hundreds of pounds buying a new one. The element we purchased from Ransom Spare was much cheaper than other suppliers and fitted perfectly and in less than a hour I had my cooker working as good as new.
Brilliant!
By Elizabeth Hart - Coalville - 12th Feb 2021
When my oven stopped heating up I expected to have to buy a new cooker, pay to get it installed and to remove the old one - a bill of at least £300. Everything else on the cooker was still working, so I decided to see if I could source a new element (which was what I thought the problem was.) I watched a video about changing the element and ordered the new one, which arrived a few days later. The total cost was £12.95. In less than an hour, the new element was in place, the oven was working again - and I feel smug!
Perfect part for the job
By Keith Borton - Sale, Gtr manchesterSale - 15th Dec 2020
The element was easy to fit and has worked well since (though not used much). I have complete faith in Ransom Spares and I feel sure it will outlast the oven.
Perfect for Hotpoint EW 81P
By Juliette Porter - Bromsgrove - 6th Dec 2020
Our freestanding main oven failed to heat up. We weren't sure if it was the element or thermostat at fault. Ransom Spares had this compatible element available at a very reasonable price, so it was worth just buying it to see if it made a difference...and it did. We weren't sure how to fit it at first and tried taking the back off. This didn't look right, so we decided to take off the inner back panel which easily revealed the element. It was a 2 minute job to snap the old one out and pop the new one in. We secured it from inside and, as the back was already off, from the rear. We screwed the inner back plate back into position and it all worked brilliantly. There was a little vibration at first but simply tightening the screws more resolved this. We are so grateful to Ransom Spares for making this affordable repair possible. We have bought other spares from Ransom, and each time, we've been similarly impressed by the items and the service. Thank you.
Does the job, slightly different size
By Tom - Southampton - 18th Nov 2020
Few months later and it's working fine still. (So can't really comment on long term quality, but seems good enough.) We have a Creda X155EK, and it's meant to be compatible. It was almost the same size as the original, but not quite (a bit bigger). There's an extra support for the bottom of the element that's screwed to the back of the oven that didn't fit with this one, so I had to drill a new hole in the metal back to screw the support into. Easy enough to do, but note you might need a drill & a small metal bit.
Great product
By Dennise McAuley - Belfast - 10th Nov 2020
Really easy to fit this product and at half the price of other websites was a fab buy.
Perfect for the job
By Robert Gibbs - Barnsley - 19th Sep 2020
Heater element was delivered quickly and fitted with no issues. Good product and at a great price.
Easy swap
By Mr Shane Wallace - Highbridge - 3rd Sep 2020
perfect replacement part. It was exactly the same as part I removed to just clipped straight in. Many thanks.
Great replacement item
By Mandie Cutler - Sutton - 16th Aug 2020
Great replacement item, looks exactly the same as the old one. Fitted it easily and have an oven that works like new now. Would definitely recommend mending oven if you can, it's easier than you think.
Very happy
By Emma poole - Peterborough - 4th Jul 2020
Very quick delivery,replaced the element in 5 minutes,very happy with service
