Beko
Beko Cooker & Hob Fan Heating Element 2100wELE2064
Suitable for Beko, Flavel, Leisure
Stock Code: 120690
£17.90inc. VAT
£14.92 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Generates the heat that the fan circulates around the oven.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E5 | Beko | Means a sensor malfunction, often an open circuit or a faulty NTC temperature sensor, so the oven cannot heat correctly. It is usually caused by a failed NTC temperature sensor or an open circuit. | Medium |
E5Medium
Beko
Means a sensor malfunction, often an open circuit or a faulty NTC temperature sensor, so the oven cannot heat correctly. It is usually caused by a failed NTC temperature sensor or an open circuit.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your cooker.
Safety: Switch off and unplug at the mains and let it cool before you start.
You’ll needScrewdriverNut driver
- 1
- 2
- 3
- 4
- 5
- 6
- 7
06
Specifications
- Part Number
- ELE2064
- EAN / Barcode
- 05030017067388
- Genuine Spare Part
- No
07
More Details
This is a high-quality fan heating element for your oven that runs at 2100 watts.
It pulls in fresh air, heats it up, and spreads it all around so your food cooks evenly and comes out just right, every time. Whether you're baking brownies or roasting a chicken, it helps make sure nothing's burnt on the outside and raw in the middle.
But if your oven’s suddenly taking ages to heat, or your meals are cooking unevenly, it might be a sign the fan element’s wearing out. Change it with this part.
Check our video tutorial below on how to fit a new one.
This oven fan heating element fits Beko, Flavel, and Leisure models.
Before ordering, please verify that this part is suitable for your model using our compatibility checker.
08
Video
How to Fit a Fan Oven Element
Please note that the following video will give you a guide on how to fit this part, however the exact fitting may differ depending on your make and model.
Safety Warning - Always unplug from the mains before carrying out any repairs.
09
Customer Reviews (2)
5.02 reviews
5
2
4
0
3
0
2
0
1
0
Does wat it says on the bag
Perfect fit and works great Couldn't ask for more
Damian hall · Edinburgh ·
Quality
Value
Ease of Fitting
BEKO fan oven element
This item was dispatched very quickly and arrived well within the timescale I was expecting. I am not an electrician, but hoped my suspicion of the fault was correct. I looked on the i/net for fault repairing and watched a short vid. This element required the oven to be removed from the base and the internal rear panel removed to access the element. Also, the rear exterior oven panel had to be removed to access the 2 screws holding the heating element in place. Once done, it was easy to remove and re-fit the new element in place. Everything fitted perfectly and with help from my wife to hold the element in place from inside the oven, I tightened the 2 screws. Attached the 2 leads, fastened the rear panels, Finished, Job well done. New oven for under £10.00. Thanks RansomSpares
Mr jim jibson · Banbury ·
Quality
Value
Ease of Fitting