AEG
AEG Cooker & Hob Round Fan Heating Element 1650W140089339018
Suitable for AEG, Electrolux, Lamona, Zanussi
Stock Code: 238883
£21.60inc. VAT
£18.00 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Generates the heat that the fan circulates around the oven.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| F10 | AEG | Means a runaway temperature fault, where the oven has overheated or the control board has read an out of range temperature. It is usually caused by a faulty temperature sensor, a defective control board with a stuck relay, or a wiring fault. | Medium |
| F17 | AEG | Means a communication failure between the induction hob and the main oven control board, or a faulty temperature sensor or NTC thermistor. It is usually caused by a fault in the induction generator, sensor, or control board. | Medium |
| F10 | Electrolux | Means the oven temperature is running away, with the oven overheating or the sensor reading excessive heat often above 500F. It is usually caused by a defective temperature sensor (thermistor) or a faulty main control board. | Medium |
| F131 | Zanussi | Means the steamer sensor temperature is too high on steam-assisted models, triggering a safety alert. It is usually caused by the steamer sensor or control board. | Medium |
F10Medium
AEG
Means a runaway temperature fault, where the oven has overheated or the control board has read an out of range temperature. It is usually caused by a faulty temperature sensor, a defective control board with a stuck relay, or a wiring fault.
F17Medium
AEG
Means a communication failure between the induction hob and the main oven control board, or a faulty temperature sensor or NTC thermistor. It is usually caused by a fault in the induction generator, sensor, or control board.
F10Medium
Electrolux
Means the oven temperature is running away, with the oven overheating or the sensor reading excessive heat often above 500F. It is usually caused by a defective temperature sensor (thermistor) or a faulty main control board.
F131Medium
Zanussi
Means the steamer sensor temperature is too high on steam-assisted models, triggering a safety alert. It is usually caused by the steamer sensor or control board.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your cooker.
Safety: Switch off and unplug at the mains and let it cool before you start.
You’ll needScrewdriverNut driver
- 1
- 2
- 3
- 4
- 5
- 6
- 7
06
Specifications
- Part Number
- 140089339018
- Alternative Part Numbers
- 3157953039
- EAN / Barcode
- 7321421134949
- Genuine Spare Part
- Yes
07
More Details
This is a genuine 1650W fan heating element replacement for your oven.
Draws in fresh air, heats it up, and then circulates it using forced convection to move the hot air throughout the oven chamber. Food cooks faster and more evenly since there are fewer hot spots.
If you notice that your oven is not heating up properly, takes longer to reach the desired temperature, or has apparent hot or cold spots, change your fan element.
This fan heating element is from AEG. It also fits Electrolux and Zanussi cookers and hobs.
Before ordering, please verify that this part is suitable for your model using our compatibility checker.
08
Customer Reviews (6)
5.06 reviews
5
6
4
0
3
0
2
0
1
0
Sort by:||
Amazing and fast delivery
My AEG fan oven stoped working - fan was blowing but no heat. Quick google and the most common issue was the fan element. I checked the part number and ordered. This arrived on a super fast delivery (ordered sat eve, arrived Monday afternoon). Fitted the part after watching a YouTube video. Turned power off, unscrewed the panel inside the oven, replaced the part and hooray it worked. VERY happy with part, cost & delivery. Thanks 🤩
Kate B · Fleet ·
Quality
Value
Ease of Fitting
Top oven element - Fitted in 5 minutes
Excellent experience, easy to find part through the website, easy to order, great delivery and exactly as described.
Steve Smedley · Long Eaton ·
Quality
Value
Ease of Fitting
Easy to fit
Website was easy to navigate, and confirmation and availability of the order was quick. The part was relatively easy to fit, and saved the cost of getting someone else out to do it!
Simon Shovelton · Bishopswood ·
Quality
Value
Ease of Fitting
Couldn't find in stock elsewhere
I found this element which was out of stock else where so very happy
Melissa Dyer · Cheshunt ·
Quality
Value
Ease of Fitting
Good product
The part came pretty quickly and we had watched a video off the Ransom website. It was easy to fit following the video instructions with useful tips about not letting the wires go etc. We fitted it in minutes and it’s working perfectly. I’m also grateful for the advice from the support team advising me on the correct part. Thank you! Great service.
Susie Sinden · Kent ·
Quality
Value
Ease of Fitting