AEG
AEG Cooker & Hob Fan Heating ElementELE2041
Suitable for AEG, Arthur Martin, Electrolux, Husqvarna Electrolux, John Lewis
Stock Code: 120671
·
£12.95inc. VAT
£10.79 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Generates the heat that the fan circulates around the oven.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| F10 | AEG | Means a runaway temperature fault, where the oven has overheated or the control board has read an out of range temperature. It is usually caused by a faulty temperature sensor, a defective control board with a stuck relay, or a wiring fault. | Medium |
| F17 | AEG | Means a communication failure between the induction hob and the main oven control board, or a faulty temperature sensor or NTC thermistor. It is usually caused by a fault in the induction generator, sensor, or control board. | Medium |
| F10 | Electrolux | Means the oven temperature is running away, with the oven overheating or the sensor reading excessive heat often above 500F. It is usually caused by a defective temperature sensor (thermistor) or a faulty main control board. | Medium |
| F131 | Zanussi | Means the steamer sensor temperature is too high on steam-assisted models, triggering a safety alert. It is usually caused by the steamer sensor or control board. | Medium |
F10Medium
AEG
Means a runaway temperature fault, where the oven has overheated or the control board has read an out of range temperature. It is usually caused by a faulty temperature sensor, a defective control board with a stuck relay, or a wiring fault.
F17Medium
AEG
Means a communication failure between the induction hob and the main oven control board, or a faulty temperature sensor or NTC thermistor. It is usually caused by a fault in the induction generator, sensor, or control board.
F10Medium
Electrolux
Means the oven temperature is running away, with the oven overheating or the sensor reading excessive heat often above 500F. It is usually caused by a defective temperature sensor (thermistor) or a faulty main control board.
F131Medium
Zanussi
Means the steamer sensor temperature is too high on steam-assisted models, triggering a safety alert. It is usually caused by the steamer sensor or control board.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your cooker.
Safety: Switch off and unplug at the mains and let it cool before you start.
You’ll needScrewdriverNut driver
- 1
- 2
- 3
- 4
- 5
- 6
- 7
06
Specifications
- Part Number
- ELE2041
- Alternative Part Numbers
- 4106
- Genuine Spare Part
- No
07
More Details
This is a high-quality 2400W fan heating element. Has a width of 205 mm, a length of 225 mm, and the distance between the screw holes is 55 mm.
It pulls in air, warms it quickly, and spreads that heat evenly throughout the oven—perfect for golden bakes, juicy roasts, and no more patchy results.
If your oven’s been taking too long to heat, cooking unevenly, or leaving food underdone, your current fan element might be the culprit. Replace it with this part.
Check our video below on how to replace a fan oven element.
This oven fan heating element fits AEG, Arthur Martin, Electrolux, Husqvarna Electrolux, John Lewis, Juno, Kuppersbuch, Rosenlew, Voss, and Zanussi cookers and hobs.
Before ordering, please verify that this part is suitable for your model using our compatibility checker.
08
Video
How to Fit a Fan Oven Element
Please note that the following video will give you a guide on how to fit this part, however the exact fitting may differ depending on your make and model.
Safety Warning - Always unplug from the mains before carrying out any repairs.
09
Customer Reviews (17)
4.817 reviews
5
14
4
3
3
0
2
0
1
0
Sort by:||
Easy and cheap replacement
I amazed my wife by fitting this replacement element although I think she was looking for a new cooker, saved myself £6-700 by just replacing the element. The replacement itself was easy enough and quite straightforward.
Kelvin Haydon · Herne Hill ·
Quality
Value
Ease of Fitting
Easy to fit.
Bought to replace failed heater element in my oven. This new one works like a dream, dead easy to fit and a bargain too. My soufflés are now rising again like they should and my sous-vide Reindeer hotpot is back on the menu - yum 😋
Ben Dawson · Chester ·
Quality
Value
Ease of Fitting
Perfect item
Quick delivery, exactly as described works PERFECTLY!
Miri perelman · London ·
Quality
Value
Ease of Fitting
Very Good after market Fan Oven Element
Paxanpax after market element, good quality, recent manufacturing date stamp, supplied in sealed heavy duty plastic bag ensuring an excellent as delivered Insulation Resistance. Was in stock at Yeovil for immediate collection and at a fraction of the cost of the Genuine Part. Element easily fitted with no issues. Sadly, the Ransom Spares on line part search for Zanussi ZCV668MW did not identify this element but their brilliant customer services identified it to me after issues of delivery direct from supplier and quality on the genuine part.
Mike Barnes · Somerset ·
Quality
Value
Ease of Fitting
Great product
This was a great product delivered in good time easy to fit and at less than half the price of the makers replacement great value.
Michael · Wiles ·
Quality
Value
Ease of Fitting
10
Questions & Answers (1)
What are the centres on the fixing screws and the dimensions of the element?
Stephen · Shoreham-by-Sea ·
Hi Stephen, this element is W205 x L225mm & the distance between the fixing holes is 55mm.
JordanStaff·