AEG
AEG Cooker & Hob 2400W Fan Oven Element3871425108
Suitable for AEG, Arthur Martin, Electrolux, Elektro Helios, Husqvarna Electrolux
Stock Code: 82764
£19.75inc. VAT
£16.46 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Generates the heat that the fan circulates around the oven.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| F10 | AEG | Means a runaway temperature fault, where the oven has overheated or the control board has read an out of range temperature. It is usually caused by a faulty temperature sensor, a defective control board with a stuck relay, or a wiring fault. | Medium |
| F17 | AEG | Means a communication failure between the induction hob and the main oven control board, or a faulty temperature sensor or NTC thermistor. It is usually caused by a fault in the induction generator, sensor, or control board. | Medium |
| F10 | Electrolux | Means the oven temperature is running away, with the oven overheating or the sensor reading excessive heat often above 500F. It is usually caused by a defective temperature sensor (thermistor) or a faulty main control board. | Medium |
| F131 | Zanussi | Means the steamer sensor temperature is too high on steam-assisted models, triggering a safety alert. It is usually caused by the steamer sensor or control board. | Medium |
F10Medium
AEG
Means a runaway temperature fault, where the oven has overheated or the control board has read an out of range temperature. It is usually caused by a faulty temperature sensor, a defective control board with a stuck relay, or a wiring fault.
F17Medium
AEG
Means a communication failure between the induction hob and the main oven control board, or a faulty temperature sensor or NTC thermistor. It is usually caused by a fault in the induction generator, sensor, or control board.
F10Medium
Electrolux
Means the oven temperature is running away, with the oven overheating or the sensor reading excessive heat often above 500F. It is usually caused by a defective temperature sensor (thermistor) or a faulty main control board.
F131Medium
Zanussi
Means the steamer sensor temperature is too high on steam-assisted models, triggering a safety alert. It is usually caused by the steamer sensor or control board.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your cooker.
Safety: Switch off and unplug at the mains and let it cool before you start.
You’ll needScrewdriverNut driver
- 1
- 2
- 3
- 4
- 5
- 6
- 7
06
Specifications
- Part Number
- 3871425108
- Alternative Part Numbers
- 3192085037, 3192085052, 3192085102, 3871425082
- EAN / Barcode
- 07321429659932
- Genuine Spare Part
- Yes
- Power
- 2400 watts
- Turns
- 2
- Length
- 225 mm
- Width 200 mm
- Bracket
- 70 mm
- Tags
- 25 mm
07
More Details
Genuine manufacturers replacement fan oven element. It is 2400w, is a 2 turn element, and has 2 fixing points. For further specifications including dimensions please see further down this page.
The fan oven element is responsible for heating up your oven. If faulty, your oven will not get hot when turned on.
This part is manufactured by Electrolux and fits select models of AEG, Arthur Martin, Electrolux, Husqvarna Electrolux, John Lewis, Juno, Kuppersbuch, Kuppersbusch, Rosenlew, Voss, Zanussi Cookers & Hobs.
If you would like help on fitting this part see our DIY repair video below.
08
Video
How to Fit a Fan Oven Element
Please note that the following video will give you a guide on how to fit this part, however the exact fitting may differ depending on your make and model.
Safety Warning - Always unplug from the mains before carrying out any repairs.
09
Customer Reviews (119)
4.9119 reviews
5
110
4
9
3
0
2
0
1
0
Sort by:||
Great product, easy to fit
Fits and works for my cooker. No issues.
Philip Noyes · Sherborne ·
Quality
Value
Ease of Fitting
Oven Fan Element no problem fitting
Exactly correct item and fitted with minor problems with corroded oven panel screws.
Ronald Burt · Burnham on Sea ·
Quality
Value
Ease of Fitting
A quickly solved problem
Oven element went in the week before an op. Replacement there on day of op, able to fit it 3 days later. Thankfully access was from the inside of the oven and not behind it, so easy to fit (no moving involved). Thanks for the quick turnaround.
S Albutt · Birmingham ·
Quality
Value
Ease of Fitting
Great value, good quality
So much cheaper than the official part on manufacturer's website. Arrived promptly and easy to fit. Great.
Jon Tedd · MARKET HARBOROUGH ·
Quality
Value
Ease of Fitting
easy to fit
Oven would trip electric when hot .So googled why? recommended to change heating element .You Tubed how to do this on a Zanussi cooker .4 screws to remove heat plate at back of oven. 2 screws to remove heating element ,pull off wires and push back on new element . While I was down there I change my light bulb and gave my oven a good clean .Saved my self a lot of money. The part is working brilliantly and the postage was so quick . The hardest part was getting back up of the floor .Not bad for a woman
silvie · Bath ·
Quality
Value
Ease of Fitting