0333 300 1293

Phone Lines Open Mon - Fri 10 am - 4.30 pm (excluding bank holidays)

BAUMATIC COOKER HOOD EXTRACTOR MOTOR FAN IMPELLER

4.8 out of 5 customer rating

Read review(s) | Read customer question(s)

Our Part Number: RS265587

In Stock Next Day Delivery Available

Category: Cooker Hoods

Our Price

£17.85

Please correct the errors and try again.
 
Genuine Spare Part
Genuine Spare Part
Genuine Spare Part
Next Day Delivery Available
More About Delivery

Is this part compatible with my appliance?

Choose your brand from the list below to check your model compatibility.

Details / Specifications

Is the impeller in your Baumatic cooker hood damaged? A wobbly impeller could be the cause of a noisy cooker fan, but luckily it’s easy to replace with this genuine Baumatic spare part.

This fits select Baumatic cooker hoods.

  • Height 140mm
  • Diameter 150mm

Latest Product Review(s)

Read All Reviews
30 Customer Review(s)

Excellent service and great product

By Mike - STOCKTON-ON-TEES - 21st Oct 2020

Bought this to replace the broken impeller fan on my Baumatic BT7.3GL, product was a genuine Baumatic/Hoover part and was a straightforward fit. Speaking to Baumatic they would only supply a complete motor unit for £100+, it's great that companies like RansomSpares.co.uk can provide parts like this and keep perfectly good appliances working for many more years at a fraction of the cost, repair! Not replace! Given the current situation with CV19 the speed of service and delivery was amazing, I did pay the extra for speedy delivery, the item arrived by 9am the next day.

Overall

Quality

Value

Ease of Fitting

Easy Fit Cooker Hood Impeller Replacement

By keith harman - Witham, England - 23rd Sep 2020

Product received promptly and was as described on-line. Isolate and disconnect power supply to motor. Carefully release duct cover and glass hood and set aside. Remove grease filters and lift casing an motor unit to remove from wall fixings. Release complete motor unit and remove carbon filters (if fitted) and black grill units from either end. Using narrow nose pliers and small box spanner, remove two locking nuts, spring washer and spacers from end of rotor spindle, remembering to turn nuts clockwise (left hand thread). Remove old impeller and clean spindle. TAKE THIS OPPORTUNITY TO THOROUGHLY CLEAN AND DE-GREASE ALL COOKER HOOD COMPONENTS BEFORE REASSEMBLY. Introduce new impeller blade (white ref: number facing towards you), aligning flat rebate on spindle with that in the impeller, gently pushing until fully seated. Securely refit spacers, spring washer and two locking nuts in reverse order, remembering to turn nuts anti-clockwise (left Hand thread). Reassemble and install cooker hood in reverse order and reconnect to power supply. HAPPY EXTRACTION.

Overall

Quality

Value

Ease of Fitting

New Life

By Roger - Manaccan - 24th Apr 2020

Impellor was a perfect replacement for the job, extraction unit is now as good as new. Ransome Spares are very efficient.

Overall

Quality

Value

Ease of Fitting

Ideal fit

By Steve Somerville - Falkirk - 21st Jan 2019

Although not listed as the part for the cookerhood I have a previous review on site labelled it as being a fit for the BT7.3GL. As such I bought one and found it a perfect fit. Easy to connect to the motor once it was out of the canopy. Don't forget that the nut on the end of the motor spindle is a left hand thread.

Overall

Quality

Value

Ease of Fitting

Good Replacement

By Keith - Nuneaton - 11th Dec 2018

Ordered this fan as a replacement for the 7BT3GL cooker hood, based on previous reviews, and it fits a treat. My only comment is that I think they should be packaged better (in a box with protection) as these fans seem to become easily unbalanced. They arrived in flimsy cardboard packing.

Overall

Quality

Value

Ease of Fitting

Extractor impellar

By Paul lynch - Ireland - 21st Nov 2018

Impellar part no rs 265587 fitted perfect into my hob extractor baumatic BT7.3GL its running like new again now thanks will shop here again

Overall

Quality

Value

Ease of Fitting

It works

By Stavros - Amsterdam - 30th Oct 2018

It arrived in a week, worked great, right part for the job.

Overall

Quality

Value

Ease of Fitting

Fits well, quick delivery

By Jaap - Amsterdam - 24th Feb 2018

Good communication and fast delivery to the Netherlands. Propellor fits well In our hood. Was a bit difficult to remove the old bolt, but flattened the screw of the motor to get more grip with a pincer. After this it was easy.

Overall

Quality

Value

Ease of Fitting

Successful replacement

By Colin Sim - Rothienorman - 22nd Nov 2017

Our Baumatic BT9.3BGL cooker hood was making a terrible racket and I was getting further earache from the wife about replacing it with a new one at almost £200. I saw this replacement impeller on Ransom spares, with good reviews, and although the fitment listing did not include my hood, I decided to try it as the cost was low enough for it not to matter too much if it was unsuitable. I dismantled the cooker hood and was able to remove the old impeller fairly easily. (The information that the nut was left-handed from previous reviews was invaluable.) The nut came off fairly easily just by holding the impeller steady. Side by side, the old and new impellers looked identical, with no obvious damage to the old one so I didn't have high hopes that the new one would make much difference. I reassembled everything and switched it on and was surprised to find that even at top speed, the hood was virtually silent again (or as quiet as it was when new.) The old impeller must have been warped just enough to cause vibration and excessive noise. Everybody in the house is now happy and the purchase of the new impeller was an excellent decision. (I don't know for sure, but I think this part probably fits 60cm, 90cm and 100cm BT Baumatic hoods.)

Overall

Quality

Value

Ease of Fitting

Good replacement part.

By Alan Mellor - Nr Boston - 28th Oct 2017

Not listed for my cooker hood, Baumatic BT73BGL, but dimensions and style the same. Fitted perfectly and was an improvement on the original ( had a metal centre).

Overall

Quality

Value

Ease of Fitting

Read All Reviews

Questions And Answers

1 Answer(s)
This is suitable for the model BT 9.1GL serial no: 0418
By Joseph - Sandy Bedfordshire - 07/01/2019
A
Hi Joseph. This not suitable for your model appliance. The one listed for your model is now marked as discontinued.
By Jack - Staff Member
1 Answer(s)
I wonder if you can help me... I need the impeller to be the following dimensions: High 120mm. Diameter 130mm. I don't think the one featured will be good but perhaps you know if you have one in stock with different reference number that fits my needs.
By Leonardo - Rochester - 07/10/2019
A
Hi Leonardo, thanks for your message. This impeller is 138mm high and 151mm in diameter. Please fill out a part enquiry with your model number and we can look in to finding the correct part for you.
By Jordan - Staff Member
1 Answer(s)
Will the impeller fit a BT9.3GL ?
By Paul - Porthcawl, South Wales - 22/08/2020
A
Hi Paul, I'm afraid this isn't correct for your model and we cannot supply the correct one. Please accept our apologies.
By Jordan - Staff Member
1 Answer(s)
Hi Will Impeller Rs265587 fit my Baumatic Btc6740ss-UK? Many thanks C
By Cuonghoang - London - 02/02/2021
A
Hi, I'm afraid this isn't listed for your model and we cannot supply an impeller that's compatible. Please accept our apologies.
By Jordan - Staff Member
1 Answer(s)
Hi, will this impeller fit the bt7.3gl? Mamy thanks dave.
By Dave - Yate Bristol - 08/03/2021
A
Hi Dave, I'm afraid this isn't the correct impeller for your model and we cannot supply one that is compatible.
By Jordan - Staff Member

Be the first to ask a question for this product.

Ask a new question