Will This Part Fit My Appliance?

Choose your brand from the list below to check your model compatibility.

Start typing your model number below to check compatibility.

Suitable For Models Of

Acec, AEG, Alfatec, Alno, Ariston, Arthur Martin, Atlas, Cannon, Castor, Corbero, Creda, Domoline, Electra, Electrolux, Elektra, Elektro Helios, Elektron, English Electric, Export, FAR, Faure, Firenzi, Frigidaire, Hotpoint, Hugin, Husqvarna, Husqvarna Electrolux, Ikea, Indesit, Jackson, John Lewis, Juno, King, Marijnen, Moffat, Nestor Martin, Novamatic, Parkinson Cowan, Progress, Rex, Rosenlew, Silentic, Therma, Tricity Bendix, UPO, Voss, Wrighton, Zanker, Zanussi, Zoppas Cookers & Hobs

Description

How do the roller catch locks on your oven door work?

Roller catch locks secure oven doors in a closed position. They consist of a roller catch attached to the door frame and a strike plate mounted on the oven door itself. When the door is closed, the roller catch slides into the strike plate and creates a secure latch. 

The roller catch has a spring-loaded mechanism that allows it to retract when the door handle is pulled, releasing the latch and enabling the door to open.

When should you replace your roller catch lock?

Signs of a faulty roller catch lock include difficulty in closing or securing the oven door, the door not staying closed, or excessive play in the latch mechanism. If the roller catch is visibly damaged or shows signs of worn-out rollers or a weakened spring, replace it. 

Would this fit in my oven door?

This door roller catch lock is a Zanussi oven replacement part. It also fits Acec, AEG, Alfatec, Alno, Ariston, Arthur Martin, Atlas, Cannon, Castor, Corbero, Creda, Domoline, Electra, Electrolux, Elektra, Elektro Helios, Elektron, English Electric, Export, FAR, Faure, Firenzi, Frigidaire, Hotpoint, Hugin, Husqvarna, Husqvarna Electrolux, Ikea, Indesit, Jackson, John Lewis, Juno, King, Marijnen, Moffat, Nestor Martin, Novamatic, Parkinson Cowan, Progress, Rex, Rosenlew, Silentic, Therma, Tricity Bendix, UPO, Voss, Wrighton, Zanker, and Zoppas cookers and hobs. Use our compatibility checker to see if this part fits your model.

Manufacturers Part Number:

  • C00118116

Alternative Part Numbers:

  • 121404
  • 305597
  • 305597
  • 510300
  • 533800
  • 6227429
  • C00118116
  • C00235546

EAN Number:

  • 8052476181167

Will this part fit your appliance?

Use our compatibility checker, Click here.

Finding your model number:

Struggling to find the model number on your Oven? Click here.

Safety note:

Warning: Always unplug any appliance from the electricity supply before carrying out any work or testing on it.

Latest Product Review(s)

Read All Reviews
17 Customer Review(s)

A Professional White Goods Parts Supplier

The sellers site containing detailed parts descriptions and exploded views was of great help and ease of finding the correct part and part number for my specific white goods product brand name was very helpful. Delivery was faster than expected especially during a Christmas delivery time slot, but as forecast it arrived on-time. Very pleased with the new part that's fitted and the quality of the component and it's function is first class. Thank you for a professional service. Highly recommended.

By FRANK LLOYD - SANDBACH CHESHIRE, UK
3rd Jan 2023

Overall

Quality

Value

Ease of Fitting

Hotpoint Oven Door Catch

Prompt delivery, removed and dismantled oven door, fitted replacement catch and re-fitted door within an hour. Never used to have to replace cooker parts at one time. Things lasted "forever". Probably giving my age away here, however it's how things are manufactured these days, however, Ransomspares were a pleasure to deal with and unreservedly recommend.

By Roger Allen - Halifax
1st Dec 2022

Overall

Quality

Value

Ease of Fitting

New oven door roller catch lock

Very happy with finding a door roller catch lock for Cannon Catterick Cannon G60GCIW on Ransom https://www.ransomspares.co.uk The price, the quality, the prompt delivery I recommend 100% I will use again very happy ;-》

By Darren_M33 - Gateshead
18th Oct 2020

Overall

Quality

Value

Ease of Fitting

excellent product

Speedy delivery and the part was very easy to fit and was also very competitively priced. Highly recommended company, excellent to deal with.

By michael roberts - nuneaton
19th Sep 2020

Overall

Quality

Value

Ease of Fitting

Reliable shop

Product was promptly delivered and just as described. Thank you for your trustworthy service.

By SR - Godalming
23rd Jun 2020

Overall

Quality

Value

Ease of Fitting

Great product great quality

Very pleased with the service it came very fast by post took 5mins to fit just a pozidrive cooker now works like new.

By Ralph Hyland - Sheerness
27th May 2020

Overall

Quality

Value

Ease of Fitting

Good product needs patience to fit.

Bought to replace the worn door catch on the lower door of my Indesit double oven cooker type ID60E2 (W) S, this is my experience of tackling the job. The supplied spare part number RS9162 is the same as hotpoint/indesit C00305597 and needs a good DIY level of skill to fit. Make sure all power to the cooker is removed before attempting his task. For access to fit this catch it is necessary to remove the right hand side panel, but to remove all of the panel securing screws (most of which are accessible on the right hand side) there is a complication in that to access some of the side panel securing screws it is also necessary to remove the front control panel. To remove the front panel first remove all the control knobs including the 3 clock controls (pull off all knobs), then remove the two small screws located under the outer knob position, then remove the screws at the bottom of the control panel. The panel can then be removed forwards to enable access to the remaining side panel securing screws fitted at the top right of the control panel position. After removing the side panel, the door catch can then be taken out by removing the two self tapping screws (accessed from the door side) and the replacement catch can be secured using the self tapping screws originally used. The reassembly of the side panel and front control panel is the reverse of the dismantling process. Overall, replacing this door catch is a little time consuming and needs a little patience to do the job. On completion restore the power to the cooker. What a pity the catch could not have been designed to be removed from the front!

By Mike Williams - Bournemouth
29th Mar 2020

Overall

Quality

Value

Ease of Fitting

Easy to buy, Easy to fit

Great that I could buy this, as I thought I was going to have to fork out for a new cooker. Easy to fit, once you check out online help videos, and it works a treat on my Indesit ID60C2 cooker. Ransom Spares are now top in my 'DIY' bookmark folder and will be the first port of call when the next thing goes wrong. I even ended up with a spare screw from the cooker after refitting the part (that seems to have become a custom in our house) but nothing rattles, or has fallen off yet, so I'm not worried.

By Grant Macleod - Stornoway
10th Feb 2018

Overall

Quality

Value

Ease of Fitting

Replacement cooker door catch for hotpoint

Part and service perfectly adequate. However if you need a part quickly delivery time was a probably a little slow for some. It took a few days but they do offer next day express delivery if required. Part was perfect fit though I was a little disappointed that no replacement screws were included. Had to use existing ones which is ok if they are not missing or damaged. Would recommend people check if they need new screws prior to ordering. The repair it self was a lot more technical than expected requiring a large amount of dismantling to access part I think many people would probably prefer tonget a repairman if they realised level of work. Once accessed the part fitted easily and functioned perfectly. Personally satisfied with purchase.

By Arthur - Barnsley
1st Feb 2018

Overall

Quality

Value

Ease of Fitting

Great item and easy to fit

Easy to fit part, takes a little bit of fiddling to get into where it's mounted as you need to take the side of the cooker off which involves partly dismantling the cooker top and back also. Once your in there and ready to go it's just 2 screws to undo to get it out of there and visa versa for re-fitting, if your oven door switch (little black push in switch which cuts the heat and fan in and out when the oven door opens and closes) is also starting to go wrong do both at the same time to stop yourself having to dismantle it all again as they are both in the same place. Quality part working well, great company to deal with, No hassles st all.

By Richard Kerton-Welch - Wells, Somerset
20th Jan 2017

Overall

Quality

Value

Ease of Fitting

Load More Reviews

Questions And Answers

1 Answer(s)
We have a Cannon C50GCIS/1 oven - roller latch has broken inside . Took the screws off and heared the latch falling inside the metal compartment. But the screw lengths are small and wondering whether that is the root cause issue , with minimal securing to the latch to keep it from coming loose and moving around. Can you confirm if the above latch is suitable and whether one can use longer screws than the current ones? Do the latches need specific screws or do the screws make the new thread ?
By Keith - London - 13/10/2018
Hi Keith. The screws for this part are self-tapping screws and this is also the correct roller catch for your model. You may need these screws RS160697 and washers RS143105 to secure the roller catch in place.
By Jack - 13/10/2018
1 Answer(s)
Hi how do I take the old part of and fit it please
By Amanda - Portsmouth - 21/10/2018
Hi Amanda, I'm afraid we wouldn't be able to give instructions on how to fit this. I'd recommend checking out our repair advice centre, or contacting an engineer for more information.
By Jordan - Staff Member
1 Answer(s)
How do you replace the door catch on the main oven door of a Cannon Chichester 10675G ?
By MR JAMES - ALLOA - 26/02/2022
Hi James, I'm afraid we cannot offer fitting advice. I'd recommend contacting an engineer to see if they can help.
By Jordan - Staff Member

Be the first to ask a question for this product.

Ask a new question

Customers Also Viewed