Next Day Delivery Available
Bosch Washing Machine Door Seal
Suitable For Models Of: Balay, Bosch, Constructa, Hitachi, Koenic, Lynx, Merker, Novamatic, Pitsos, Profilo, Schulthess, Siemens, Viva Washing Machines Read More
Will This Part Fit My Appliance?
Choose your brand from the list below to check your model compatibility.
Start typing your model number below to check compatibility.
Description
Genuine Bosch Washing Machine Door Rubber. This part fits Bosch and Siemens Washing Machines and is the rubber seal that fits behind the door. If your existing door gasket is showing signs of wear or is leaking then check the models listed below for compatibility.
How to replace a Washing Machine Door Seal:
The following DIY repair video should assist you in fitting this part. However the exact procedure may differ depending on your make and model.
Safety Warining - Always unplug from the mains before carrying out any repairs.
Latest Product Review(s)
Quality Part - Easy to Fit
After watching some videos showing how the part is fitted and what you need to dismantle to fit it, I tackled the job myself. The part seems to be good quality and true to the original. It was quite easy to fit and I was pleased that I got it right first time and there was no longer a leak! An experienced domestic repair man could probably fit it in 20 mins. It took me about 1.5 hours, but I was able to do it with just a few hand tools and not too much frustration or struggling.
Door seal
Exactly what was required Springs made it a bit awkward to fit, but exactly what was required/expected
Excellent service
Easy to use website, fast delivery and the repair video was enormously helpful, especially as the one used in the video was almost identical to mine. Job done in about 30 minutes. Will use this company again.
Great 👍 Video.
It was extremely ease to replace with help of the video.I would have struggled to replace it with out the video. Thank you very much. Vic. Plehov.
Fits my Balay
It is not easy to fit a door seal, but a few YouTube vids and all sorted. Fits my Balay 3TS60106A perfectly.
Job done
Good quality product, not the cheapest but it's a genuine Bosch part so it is what it is... Not the easiest thing to fit, especially on a Bosch, main trouble is fitting the inner band back on, no issue with the actual seal though
Perfect replacement
My Bosch washing machine is approaching 14 years old now, and I had noticed a small amount of water dripping down the front of the machine. Looking at the door seal it was slightly torn and worn. I decided on a genuine Bosch part, given the old one had lasted well and the extra cost wasn't excessive (especially if it lasts 10 years plus again!), and it arrived impressively quickly. I watched a video to see how to change it, and got the old one off very easily having removed the front panel of the machine. The new one seemed quite difficult to get over the lip....until I realised I had the seal backwards! Turning it around, it went on very easily, the springs locking it in place with the help of a small lever. A perfect fit, and no more leaks. Really pleased with the result.
Bosch door seal
Went for the genuine article. Bit dearer but worth it as still reasonable price compared to other web sites. Viewed a few video turorials and fitted it. Very easy but getting large inner retaining spring on bit fiddly .
Excellent product, care in fitting
Make sure you watch the video fitting, mine is a older machine a Classixx Express. There is a top screw which must be removed - behind the removable soap drawer which holds the front panel in place, when replacing fit this before the two bottom ones. Removing the seal springs as per the video, my front panel one was different a single wire with a short spring difficult to see but poked around to find. The front panel can be placed beside the machine as the door lock mechanism did not look easy to unplug - the cabling was just long enough to do this. The drum seal spring came away without problem, when fitting the seal use washing up liquid as a lubricant - makes fitting easy and it can be re-positioned so the drain holes are at the bottom as when fitting the seal slid round. The seal springs can be a pig, again use washing up liquid they then slide in the hand without binding - no last minute flying off. Someone mentioned removing the drum weight for more room, on mine it is held on with the a metal band under tension and could not be removed, this did make the spring replacing a bit tight. Otherwise fairly easy - took me 3 hours, very pleased with the end result will use again.
Best quality genuine part.
This washing machine boot that I have recently ordered was not the first time I have used Ransom Spares. I have used them in the past for completely renovating a Karcher pressure washer and I've also bought parts for dishwashers and other customer's washing machines. In fact, to be honest, I bought a boot for a washing machine in which there were two alternative part numbers. Typically, I ordered the wrong one but Ransom Spares were very quick to take back the unwanted one, send me the alternative part and reimburse me the slight money difference. Their website is so easy to use and often has the manufacturer's technical drawings of parts so you can correctly identify the bit you want. The parts are always well packed, prices are fair & reasonable, payment with PayPal is painless and if they have it in stock, delivery is always very quick. Pattern parts are available but I've found that the manufacturer's genuine part is usually worth paying the extra for; it fits, it's a better quality and you can trust that you're not going to have to go back to the customer because of a problem! Their range of spares is ginormous! Indeed, it's hard to think of any appliance that Ransom Spares would not have the part for and I know I shall be using them again in the future. An excellent company to deal with.