Will This Part Fit My Appliance?

Choose your brand from the list below to check your model compatibility.

Start typing your model number below to check compatibility.

Description

Manufacturers Part Number:

  • 00358306

Alternative Part Numbers:

  1. 00358306
  2. 00366386

Latest Product Review(s)

1 Customer Review(s)

DRAIN HOSE BOSCH CLASSIxx 1000 washing machine

as per original hose -TWO o rings on washing machine end of hose. with power off-remove lid of machine , set asside 240v transformer 2x Torx screws - removed drain vent bottle using pliers on hose clip -this is the clear /opaque bottle the corrugated waste pipe slots into ,-removed old hose , Cleaned and fitted new hose -(push fit) & re assembled machine . note the Bosch design is poor as the corrugated waste pipe comes directly out of the machine , it would have been far better to have had an 90 degree elbow either built into the hose or air vent bottle- If you push the washing machine bach into kitchen be very carefull not to crimp the hose or overly bend or strain the waste pipe - this is where the old hose leaked ---- weak design by bosch . Ransom Spres once again providing the correct hose for the machine - I d stay clear of the "copies " pertaining to fit the Bosch Machine- with inferior plastics , incorrect O ring configuration - your "asking" for a flood ! So thank You Ransom - Its worth the few quid extra for the original part

By pete andrew - south shields
26th Sep 2022

Overall

Quality

Value

Ease of Fitting

Questions And Answers

1 Answer(s)
What is the length of this hose? ALSO Are the end connectors exactly as shown in the above picture?
By Chris - BORDON - 31/10/2018
Hi Chris. This Hose is 1.5m in length.
By Jack - 31/10/2018

Be the first to ask a question for this product.

Ask a new question