0333 300 1293

Phone Lines Open Mon - Fri 10 am - 4.30 pm (excluding bank holidays)

How To Replace A Drain Hose On A Dishwasher - Bosch

Find the drain hose for your dishwasher

Video Transcript:

Hello, my name is Shawn and I'm going to show you how to replace the drain hose on a dishwasher.  First of all make sure that you've isolated the machine from the mains.

The first thing i'm going to do is remove the lid.  On this model the lid is secured at the front by 2 clips.  Simply press them up and the lid will come off.

I'm now going to take the left hand side panel off to get access to the drain hose.  This is done by removing 2 torx screws here, and here.  You can then simply lift the panel off.

The drain hose is fixed on the matrix and goes around and out the back of the dishwasher.  You can see a small white cover that secures the inlet valve and the drain hose.  We're going to remove the cover and release the hose.  The drain hose is secured in the little ridge there.

Now we're going to remove the water matrix which is held in place by 2 screws, 2 nuts on the inside of the dishwasher and 2 clips.  Now we can remove the inlet hose and remove the 2 electical connections.

Before we remove the matrix we need to place a towel in behind it because the matrix will have water inside.  As I remove the matrix i'll place my finger over the outlet and then empty the water in to a bowl.

Now we can remove the drain hose and replace it with a new one.

To refit the new drain hose simply thread it through the back near the inlet valve.  Refit the matrix, the inlet hose, inlet valve cover, the side panel and the lid.

And that's how to you replace the drain hose on a dishwasher.  Remember that hoses and all dishwasher spares can be found on the Ransom Spares website.  Thanks for watching.