Will This Part Fit My Appliance?

Choose your brand from the list below to check your model compatibility.

Start typing your model number below to check compatibility.

Description

What is the use of a clamping ring in a washing machine?

A clamping ring in a washing machine secures the tub or drum assembly in place. It’s at the top of the outer tub and holds the inner drum securely during the wash and spin cycles. 

The clamping ring ensures proper alignment and prevents excessive movement or vibration of the drum during operation.

Why does it get damaged? 

A clamping ring can get damaged due to overloading the washing machine which puts excessive strain on the ring. Rough handling or impact during transportation or installation can also lead to damage. The continuous agitation and high-speed spinning of the drum contribute to wear and tear on the clamping ring.

Is it easy to replace with a new one? 

It's quite simple. Refer to our DIY video below on how to fit a washing machine clamping ring.

This clamping ring by Hotpoint is a genuine washing machine replacement part. It also fits Ariston, Indesit, and Whirlpool washing machines.

How to Fit a Washing Machine Door Seal Front Clamping Ring

Please note that the following video will give you a guide on how to fit this part, however the exact fitting may differ depending on your make and model.

WarningSafety Warning - Always unplug from the mains before carrying out any repairs.

  • Washing Machine used - Hotpoint NSWM743UWUK
  • Part number used - RS1302

Need to find a specific part of the video? Use the timestamps below...

  • 0:26 - Removing washing machine lid
  • 0:36 - Removing front outer clamping band ring spring
  • 0:55 - Removing old door seal and retaining spring
  • 1:05 - Lubricating new door seal
  • 1:17 - Fitting new door seal to the washing machine
  • 1:38 - Re-fitting retaining spring
  • 2:37 - Re-fitting out clamping band ring spring
  • 2:57 - Re-fitting washing machine lid

Specification:

  • Genuine spare part

Manufacturers Part Number:

  • C00119210

Alternative Part Numbers:

  1. 481010914776
  2. C00119210
  3. C00508686
  4. HPTC00119210

EAN Number:

  • 8052476192101

Will this part fit your appliance?

Use our compatibility checker, Click here.

Finding your model number:

Struggling to find the model number on your Washing Machine? Click here.

Safety note:

Warning: Always unplug any appliance from the electricity supply before carrying out any work or testing on it.

Latest Product Review(s)

4 Customer Review(s)

Perfect

This clamp is a perfect fit. Can be a bit fiddly to fit. I found it easier to separate one end of the wire/spring then work the wire into the fitting groove of the door seal & then connect the wire/spring back together again.

By John britnell - Turriff
29th Mar 2024

Overall

Quality

Value

Ease of Fitting

Correct part, arrived promptly, watch the video

This is the easier of the 2 clamping rings to fit, the technician in the video must do 20 of these every day to make it look so easy! A second pair of hands certainly helps. A message from the manufacturer says that it is important to install with the spring at the 1 o'clock position. the old ring (factory fitted) was in the 7 o'clock position.... I have now repaired to machines in the last month, one with the spring in each position, both are operating without problem.

By Nigel Walker - Halifax
19th Mar 2024

Overall

Quality

Value

Ease of Fitting

Easy to fit.

Did the task was easier to fit than I expected. Just needed more pressure than I was using at first.

By Jan Parkes - Birmingham
24th Mar 2021

Overall

Quality

Value

Ease of Fitting

RS1302

exactly what was required and straightforward to fit

By I Warner - North Walsham
23rd Jan 2017

Overall

Quality

Value

Ease of Fitting

Questions And Answers

Be the first to ask a question for this product.

Ask a new question

Customers Also Viewed