Next Day Delivery
Order by 4pm
Genuine Parts
Quality guaranteed
UK & Ireland
Fast shipping
Expert Help
Parts advice available
Hotpoint
Suitable for Hotpoint, Ariston, Creda, Crusader, Electra
Stock Code: 4854
£11.33 ex. VAT
Transfers motor power to turn the drum.
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| F7 | Hotpoint | Means a fault within the heating circuit or the electronic control board. It is usually caused by the heating circuit or control board, though on some models the drum is not rotating due to a snapped belt or faulty motor. | Medium |
| F2 | Indesit | Means a motor circuit fault that stops the drum rotating or starting. It is usually caused by a motor jam, a faulty motor capacitor, or a broken drum belt. | High |
Hotpoint
Means a fault within the heating circuit or the electronic control board. It is usually caused by the heating circuit or control board, though on some models the drum is not rotating due to a snapped belt or faulty motor.
Indesit
Means a motor circuit fault that stops the drum rotating or starting. It is usually caused by a motor jam, a faulty motor capacitor, or a broken drum belt.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
General fitting guidance. The exact steps can vary slightly with the make and model of your tumble dryer.
Safety: Switch off and unplug at the mains before you start.
This is a genuine tumble dryer belt. Has a section of 7PHE and is 1860 mm long.
Keeps your dryer drum rotating by transferring power from the motor. As the motor runs, it spins the belt, which turns the drum—circulating hot air for even, efficient drying.
If you hear squealing, screeching, or the drum isn’t spinning at all, the belt could be stretched, worn, or broken. Replace it with this part to restore smooth, reliable performance.
Check our video below on how to fit a new one.
This tumble dryer belt is from Hotpoint. It also fits Ariston, Creda, Crusader, Electra, Export, Indesit, Jackson, and Proline models.
Before ordering, please verify that this fits your model using our compatibility checker.
Please note that the following video will give you a guide on how to fit this part, however the exact fitting may differ depending on your make and model.
Safety Warning - Always unplug from the mains before carrying out any repairs.
Not the exact replacement belt according to the number on my broken belt but research suggested this belt as a replacement even though 4mm shorter. Was expecting real battle to fit and got just that. However get a long socket that fits over the motor spindle then angle this up towards the belt. Hoop belt over the socket then lower socket level with spindle. Turn the drum (had someone else do that ) and belt should slide off socket onto spindle. Found the exact belt replacement in other places but at exhorbitant price so glad I got this alternative one. Been working ok couple of weeks now. Quick delivery
Speedy service, got it within a matter of days was the exact belt i needed for my tumble dryer make couldnt be happier :)
Easy to navigate web site. Friendly, helpful customer services. Part arrived very quickly. Would recommend. Thank you.
thanks for the prompt service. the belt fitted well. I found that the postage was very expensive for such a small item. Postage costed more that the belt