Will This Part Fit My Appliance?

Choose your brand from the list below to check your model compatibility.

Start typing your model number below to check compatibility.

Description

Manufacturers Part Number:

  • 6.630-357.0

Alternative Part Numbers:

  1. 66303570

EAN Number:

  • 4002667790535

Latest Product Review(s)

2 Customer Review(s)

Pressure washer switch

As noted somewhere else, the switch is of a poor quality but then so was the original! Quite easy to fit if you're into DIY. Good price and arrived speedily.

By Rob bowsher - Reading
14th Jun 2016

Overall

Quality

Value

Ease of Fitting

Pressure Washer Switch

Better than the original part. Easy to fit - you'll need a long torx drive for the outer case and brute force, ignorance and a flat bladed screwdriver for the clips on the inner casing.The wires pull off the spade terminals on the old switch and that can then be pulled from the rest of the unit and thrown as far as is possible.... ... after you remove the rotary switch handle. Push the rotary switch handle back into the new switch - it only goes in one way so take your time getting it right. Reattach the cables the same way they came off - they'll have bent into place in the casing so assuming you've not bent them out of shape it's a doddle. Also they're colour coded - get the two brown wires one one side and that'll do. Click the switch back into place, carefully run the wires back into the slots in the housing, reallign the halves of the inner casing and press back together - don't force it - the thing will only go one way. You can connect the water and power and test it at this point if you like. Putting the inner casing back in the outer is simplicity itself. For change of 6 quid you've got a new pressure washer - what's not to like?

By Tim Griffiths - Wiveliscombe
8th May 2016

Overall

Quality

Value

Ease of Fitting

Questions And Answers

Be the first to ask a question for this product.

Ask a new question

Customers Also Viewed