Zanussi
Zanussi Dishwasher Drain Pump140000738017
Suitable for Zanussi, AEG, Arthur Martin, Bluesky, Carma
Stock Code: 249258
£36.00inc. VAT
£30.00 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Pumps the dirty water out of the dishwasher at the end of the cycle.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| AL6 | AEG | Means a water drainage problem, where the machine cannot empty properly. It is usually caused by clogged filters or sump, a kinked drain hose, a blocked sink spigot, or a siphon blanking plug left in place. | High |
| C2 | AEG | Means a water drainage failure, where the machine cannot empty properly. It is usually caused by a kinked drain hose, a clogged internal filter, a dirty sump, or a blocked sink spigot. | High |
| E2 | AEG | Means a drainage failure where water is not emptying properly, or on some compact models a heating element malfunction. It is usually caused by clogged filters, a kinked drain hose, a blocked drain pump, or an improperly installed sink spigot. | High |
| I20 | AEG | Means a drainage fault, where the machine cannot expel water properly. It is usually caused by a clogged filter, a blocked drain hose, or a faulty drain pump. | High |
| AL6 | Electrolux | Means the unit cannot drain the water away. It is usually caused by clogged filters, a blocked drain hose, a restricted sink trap, or a blocked drain pump. | High |
| C2 | Electrolux | Means the unit is not draining properly. It is usually caused by clogged filters, a blocked drain pump, a kinked drain hose, or a blocked sink spigot. | High |
| E2 | Electrolux | Means the machine cannot remove the water, leaving it sitting in the tub. It is usually caused by a clogged filter, an obstructed drain pump, or a kinked drain hose. | High |
| E20 | Electrolux | Means the unit cannot remove the water. It is usually caused by a blocked cylindrical filter at the base, a clogged drain hose, or a faulty drain pump. | High |
| E4 | Electrolux | Means standing water is preventing the unit from draining correctly. It is usually caused by a drainage fault, a water leak into the base pan, or an overfill from excess foam due to the wrong detergent. | High |
| F8 | Electrolux | Means the unit cannot empty the water properly, with water remaining in the bottom of the tub. It is usually caused by a blocked filter, a clogged drain hose, or a malfunctioning sensor. | High |
| I20 | Electrolux | Means the dishwasher is not draining properly. It is usually caused by a blocked drain pump, a clogged waste hose, an unremoved knockout plug in the disposer, or a clogged sink spigot. | High |
| I44 | Electrolux | Means the pressure switch has detected a water level or drainage problem. It is usually caused by dirty filters, a clogged drain pump, or a kinked drain hose. | High |
| AL2 | Zanussi | Means the machine is unable to remove water from the tub, also reported as i20, C2, F2, or two beeps or flashes. It is usually caused by a blockage, a clogged filter, or an incorrect drain installation. | High |
| AL6 | Zanussi | Means the machine is unable to empty water, also reported as i20, C2, or F2. It is usually caused by clogged filters, a blocked drain pump, a kinked drain hose, or a blocked sink spigot. | High |
| C2 | Zanussi | Means the machine cannot empty water, interchangeable with i20, F2, or AL6. It is usually caused by a blocked filter, a clogged drain hose, or a faulty drain pump. | High |
| I20 | Zanussi | Means the appliance is unable to remove water. It is usually caused by a clogged filter, a blocked or kinked drain hose, or a faulty drain pump. | High |
AL6High
AEG
Means a water drainage problem, where the machine cannot empty properly. It is usually caused by clogged filters or sump, a kinked drain hose, a blocked sink spigot, or a siphon blanking plug left in place.
C2High
AEG
Means a water drainage failure, where the machine cannot empty properly. It is usually caused by a kinked drain hose, a clogged internal filter, a dirty sump, or a blocked sink spigot.
E2High
AEG
Means a drainage failure where water is not emptying properly, or on some compact models a heating element malfunction. It is usually caused by clogged filters, a kinked drain hose, a blocked drain pump, or an improperly installed sink spigot.
I20High
AEG
Means a drainage fault, where the machine cannot expel water properly. It is usually caused by a clogged filter, a blocked drain hose, or a faulty drain pump.
AL6High
Electrolux
Means the unit cannot drain the water away. It is usually caused by clogged filters, a blocked drain hose, a restricted sink trap, or a blocked drain pump.
C2High
Electrolux
Means the unit is not draining properly. It is usually caused by clogged filters, a blocked drain pump, a kinked drain hose, or a blocked sink spigot.
E2High
Electrolux
Means the machine cannot remove the water, leaving it sitting in the tub. It is usually caused by a clogged filter, an obstructed drain pump, or a kinked drain hose.
E20High
Electrolux
Means the unit cannot remove the water. It is usually caused by a blocked cylindrical filter at the base, a clogged drain hose, or a faulty drain pump.
E4High
Electrolux
Means standing water is preventing the unit from draining correctly. It is usually caused by a drainage fault, a water leak into the base pan, or an overfill from excess foam due to the wrong detergent.
F8High
Electrolux
Means the unit cannot empty the water properly, with water remaining in the bottom of the tub. It is usually caused by a blocked filter, a clogged drain hose, or a malfunctioning sensor.
I20High
Electrolux
Means the dishwasher is not draining properly. It is usually caused by a blocked drain pump, a clogged waste hose, an unremoved knockout plug in the disposer, or a clogged sink spigot.
I44High
Electrolux
Means the pressure switch has detected a water level or drainage problem. It is usually caused by dirty filters, a clogged drain pump, or a kinked drain hose.
AL2High
Zanussi
Means the machine is unable to remove water from the tub, also reported as i20, C2, F2, or two beeps or flashes. It is usually caused by a blockage, a clogged filter, or an incorrect drain installation.
AL6High
Zanussi
Means the machine is unable to empty water, also reported as i20, C2, or F2. It is usually caused by clogged filters, a blocked drain pump, a kinked drain hose, or a blocked sink spigot.
C2High
Zanussi
Means the machine cannot empty water, interchangeable with i20, F2, or AL6. It is usually caused by a blocked filter, a clogged drain hose, or a faulty drain pump.
I20High
Zanussi
Means the appliance is unable to remove water. It is usually caused by a clogged filter, a blocked or kinked drain hose, or a faulty drain pump.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your dishwasher.
Safety: Switch off and unplug at the mains before you start.
You’ll needScrewdriver
- 1
- 2
- 3
- 4
- 5
- 6
- 7
06
Specifications
- Part Number
- 140000738017
- Alternative Part Numbers
- 1113101008, 1115916007, 50276023004, 50286272005
- EAN / Barcode
- 7321422736739
- Genuine Spare Part
- Yes
07
More Details
This genuine pump has two electrical connectors and kicks into action during the drain phase—pushing used water out through the hose and helping prevent clogs from food scraps or soap buildup.
If your dishes are coming out soggy or there’s standing water left behind, your pump might be on its last legs. Daily use can wear it down, but no worries—just pop in this replacement and get things flowing smoothly again.
Check our video below on how to fit a new one.
This dishwasher drain pump is from Zanussi. You can also check other suitable brands from the list above.
Before ordering, please verify that this kit works for your model using our compatibility checker.
08
Video
How to replace the pump on a dishwasher:
The following DIY repair video should assist you in fitting this part. However the exact procedure may differ depending on your make and model.
Safety Warning - Always unplug from the mains before carrying out any repairs.
09
Customer Reviews (3)
5.03 reviews
5
3
4
0
3
0
2
0
1
0
Great product, very easy to fit
Product was great and was very easy to fit. The part was stocked so no delay in it being posted out and at a reasonable price, the only problem I had was with the delivery company as they just threw my delivery down at my door, no care whatsoever as to what it was or the value of the product, I’m surprised it wasn’t damaged, however this was no fault of ransom spares, I contacted the delivery company and had no reply, they obviously just don’t care about customer satisfaction. 5 stars for product though and I’d recommend.
Richard Yersz · Denny ·
Quality
Value
Ease of Fitting
Easy to fit
It was straightforward to find the correct product and once ordered it arrived quickly. It was vey easy to fit with the help of the video - even for a novice . Very good value compared with getting a repair person in to do the job.
Dr Jean Fletcher · Narraghmore ·
Quality
Value
Ease of Fitting
Did the job!
Great quality replacement for broken dish washer pump. Fitted with no fuss, and works perfectly.
Matt · Leeds ·
Quality
Value
Ease of Fitting