Next Day Delivery Available
Baumatic Cooker Hood Extractor Motor Fan Impeller
Suitable For Models Of: Baumatic Cooker Hoods Read More
£20.90
Due back in stock 13th Aug 2024
Part No: RS265587
Will This Part Fit My Appliance?
Choose your brand from the list below to check your model compatibility.
Start typing your model number below to check compatibility.
Part is compatible with 
We are unable to confirm if this part will fit with model number ""Description
Is the impeller in your Baumatic cooker hood damaged? A wobbly impeller could be the cause of a noisy cooker fan, but luckily it’s easy to replace with this genuine Baumatic spare part.
This fits select Baumatic cooker hoods.
- Height 140mm
- Diameter 150mm
Latest Product Review(s)
Read All Reviews
31 Customer Review(s)
As Original Part, Easy Fit
Part is same as original, removed whole motor from extractor before fitting. Two man job to refit motor as needs support from below hood whilst screwed back from top. Overall easy job for an amateur just turn off power and note wiring details before dismantling.
By Russell Walden - Matlock
1st May 2021
Excellent service and great product
Bought this to replace the broken impeller fan on my Baumatic BT7.3GL, product was a genuine Baumatic/Hoover part and was a straightforward fit. Speaking to Baumatic they would only supply a complete motor unit for £100+, it's great that companies like RansomSpares.co.uk can provide parts like this and keep perfectly good appliances working for many more years at a fraction of the cost, repair! Not replace! Given the current situation with CV19 the speed of service and delivery was amazing, I did pay the extra for speedy delivery, the item arrived by 9am the next day.
By Mike - STOCKTON-ON-TEES
21st Oct 2020
Easy Fit Cooker Hood Impeller Replacement
Product received promptly and was as described on-line. Isolate and disconnect power supply to motor. Carefully release duct cover and glass hood and set aside. Remove grease filters and lift casing an motor unit to remove from wall fixings. Release complete motor unit and remove carbon filters (if fitted) and black grill units from either end. Using narrow nose pliers and small box spanner, remove two locking nuts, spring washer and spacers from end of rotor spindle, remembering to turn nuts clockwise (left hand thread). Remove old impeller and clean spindle. TAKE THIS OPPORTUNITY TO THOROUGHLY CLEAN AND DE-GREASE ALL COOKER HOOD COMPONENTS BEFORE REASSEMBLY. Introduce new impeller blade (white ref: number facing towards you), aligning flat rebate on spindle with that in the impeller, gently pushing until fully seated. Securely refit spacers, spring washer and two locking nuts in reverse order, remembering to turn nuts anti-clockwise (left Hand thread). Reassemble and install cooker hood in reverse order and reconnect to power supply. HAPPY EXTRACTION.
By keith harman - Witham, England
23rd Sep 2020
New Life
Impellor was a perfect replacement for the job, extraction unit is now as good as new. Ransome Spares are very efficient.
By Roger - Manaccan
24th Apr 2020
Ideal fit
Although not listed as the part for the cookerhood I have a previous review on site labelled it as being a fit for the BT7.3GL. As such I bought one and found it a perfect fit. Easy to connect to the motor once it was out of the canopy. Don't forget that the nut on the end of the motor spindle is a left hand thread.
By Steve Somerville - Falkirk
21st Jan 2019
Good Replacement
Ordered this fan as a replacement for the 7BT3GL cooker hood, based on previous reviews, and it fits a treat. My only comment is that I think they should be packaged better (in a box with protection) as these fans seem to become easily unbalanced. They arrived in flimsy cardboard packing.
By Keith - Nuneaton
11th Dec 2018
Extractor impellar
Impellar part no rs 265587 fitted perfect into my hob extractor baumatic BT7.3GL its running like new again now thanks will shop here again
By Paul lynch - Ireland
21st Nov 2018
It works
It arrived in a week, worked great, right part for the job.
By Stavros - Amsterdam
30th Oct 2018
Fits well, quick delivery
Good communication and fast delivery to the Netherlands. Propellor fits well In our hood. Was a bit difficult to remove the old bolt, but flattened the screw of the motor to get more grip with a pincer. After this it was easy.
By Jaap - Amsterdam
24th Feb 2018
Successful replacement
Our Baumatic BT9.3BGL cooker hood was making a terrible racket and I was getting further earache from the wife about replacing it with a new one at almost £200. I saw this replacement impeller on Ransom spares, with good reviews, and although the fitment listing did not include my hood, I decided to try it as the cost was low enough for it not to matter too much if it was unsuitable. I dismantled the cooker hood and was able to remove the old impeller fairly easily. (The information that the nut was left-handed from previous reviews was invaluable.) The nut came off fairly easily just by holding the impeller steady. Side by side, the old and new impellers looked identical, with no obvious damage to the old one so I didn't have high hopes that the new one would make much difference. I reassembled everything and switched it on and was surprised to find that even at top speed, the hood was virtually silent again (or as quiet as it was when new.) The old impeller must have been warped just enough to cause vibration and excessive noise. Everybody in the house is now happy and the purchase of the new impeller was an excellent decision. (I don't know for sure, but I think this part probably fits 60cm, 90cm and 100cm BT Baumatic hoods.)
By Colin Sim - Rothienorman
22nd Nov 2017
Questions And Answers
1 Answer(s)
This is suitable for the model
BT 9.1GL serial no: 0418
Hi Joseph. This not suitable for your model appliance. The one listed for your model is now marked as discontinued.
1 Answer(s)
I wonder if you can help me... I need the impeller to be the following dimensions:
High 120mm.
Diameter 130mm.
I don't think the one featured will be good but perhaps you know if you have one in stock with different reference number that fits my needs.
Hi Leonardo, thanks for your message. This impeller is 138mm high and 151mm in diameter. Please fill out a part enquiry with your model number and we can look in to finding the correct part for you.
1 Answer(s)
Will the impeller fit a BT9.3GL ?
Hi Paul, I'm afraid this isn't correct for your model and we cannot supply the correct one. Please accept our apologies.
1 Answer(s)
Hi
Will Impeller Rs265587 fit my Baumatic Btc6740ss-UK?
Many thanks
C
Hi, I'm afraid this isn't listed for your model and we cannot supply an impeller that's compatible. Please accept our apologies.
1 Answer(s)
Hi, will this impeller fit the bt7.3gl? Mamy thanks dave.
Hi Dave, I'm afraid this isn't the correct impeller for your model and we cannot supply one that is compatible.
