Will This Part Fit My Appliance?

Choose your brand from the list below to check your model compatibility.

Start typing your model number below to check compatibility.

Description

How to replace a Washing Machine Door Seal:

The following DIY repair video should assist you in fitting this part.  However the exact procedure may differ depending on your make and model.

WarningSafety Warining - Always unplug from the mains before carrying out any repairs.

Latest Product Review(s)

Read All Reviews
7 Customer Review(s)

As described and seems good quality

As described. Seems good quality. Fitting was straightforward.

By Rupert Ackroyd - Nottingham
13th Nov 2017

Overall

Quality

Value

Ease of Fitting

GOOD VALUE PRODUCT

DOOR SEALS COLLECT A LOT OF GUNGE WHERE IT CANNOT BE SEEN,AND CANNOT BE CLEANED--VERY UNHYGIENIC THEREFORE A REPLACEMENT SHOULD BE FITTED WHEN THE VISIBLE SECTION BECOMES STAINED/FOULED RANSOM PROVIDES EXACT REPLACEMENT--ITS NOT SIMPLE TO FIT,BUT THE VIDEO MAKES IT A LOT EASIER TO UNDERSTAND AND DO THE JOB MY MACHINE IS NOW GOOD FOR ANOTHER COUPLE OF YEARS,AND THE COST OF THE NEW PART IS GOOD VALUE

By PETER PHILLIPS - MILFORD HAVEN
8th Jun 2017

Overall

Quality

Value

Ease of Fitting

As described

The only gripe I have is that the installed seal seems off centre, vertically. It's centre seems to be a little above the door' centre giving the bottom 'a better seal' (more contact surface) than the top. This is where a layman like myself is inadequate for reviewing. I don't know if it is a compensation for the degradation in use (giving it room to stretch) or a slight error in manufacture or storage that distorted the component. Nor do I know if it is permanent or not. I have made sure all the ridges are fully slotted into the correct flaps and the clips are fully installed. The result makes the door considerably harder to close but is secure and have had no leaks as of yet.

By NoobRepairer - Liverpool
28th Jan 2014

Overall

Quality

Value

Ease of Fitting

Good service

it was fast service and easy to fix.i just fixed my self.

By Mr MURUGESU VIJAYAKUMAR - Croydon
15th Jan 2013

Overall

Quality

Value

Ease of Fitting

Absolutely Brilliant

Our washing machine started to smell fusty and it steadily got worse. I messed around for months, stipping it down, cleaning all the pipes, using those cleaner that you put in the drum and nothing worked. I could see some mold on the old seal so eventually decided to get a new one. Don't know why I waited so long. For less than £20 and fitted within 20 mins (only needed to remove the lid so just 2 screws) the machine is like new. Don't mess around like I did. Just get order one and get it changed.

By Mr Steven Borman - Brough
7th Aug 2012

Overall

Quality

Value

Ease of Fitting

perfect item

great item fitting is easy if you understand how it is sealed ( one large spring out of sight on the drum side and a wire cw spring for the front). it does look like it is too large but I assure you it goes in. It is helpful if there is another pair of hands to hold the spring as you fit it as it is quite tight

By Mr malcolm craig - pontefract
17th Jul 2012

Overall

Quality

Value

Ease of Fitting

Load More Reviews

Questions And Answers

Be the first to ask a question for this product.

Ask a new question

Customers Also Viewed